rattling and foggy windows

[Broccoli8]

hey guys, I know little to nothing about these trucks and cars in general so I was wondering if you could help me out. Whenever the truck is in drive and my foot is on the brake something rattles pretty badly but as soon as I take my foot off the brake and drive or put it in park the rattling stops. Also, the windows fog up everytime I drive and I don't know why.


Sent from my iPhone

 

[gregnash]

Window fogging is moisture in the cab and temp being warmer inside than out.

As for rattle you gotta see if you can locate. When was last time the brakes were serviced? Any other symptoms you could detail?

Look in my sig line for FSMs that should help.

 

[Broccoli8]

brakes were actually serviced this last weekend. those are the only symptoms I've seen so far, I tried taking a video but it won't let me upload


Sent from my iPhone

 

[Output Shaft]

Upload your video to YouTube first. Then post the YouTube link with the media button.

 

[gregnash]

Look at the FSM for information on driveline play. You may have a loose something in your driveline. If you haven't now would also be a good time to go through everything and baseline all your fluids and what not to see what is going on.

 

[Broccoli8]

okay thanks for all the advice and help!


Sent from my iPhone

 

[Broccoli8]

yeah it's a 62 alright, thank you


Sent from my iPhone

 

[Landpimp]

dont know where that went

but set the dash lever to fresh not recirculate. Run the AC to clear the windows faster, open window a touch helps.

check front floor for wetness

might be a heater core leaking but they seem to last forever

rattle might just be a heat shield or something random. I know there is a lot of torque when in gear and foot on brake, can cause stuff to rattle oddly.

 

[Homey55]

Could be a rough idle and a bad motor mount.

 

[Landpimp]

Could be, I had a bad driverside mount before, I noticed it when in gear, foot hard on brake and hitting the gas, could see it lifting up. I think I remember noticing the T case lever moving way more(right) than it was suppose to

Could be a rough idle and a bad motor mount.