question for the ones with the tundra IFS swap

[1aSTIg1]

hey guys about a week ago I was asking if 2020 tundra trd pro fox shocks would swap right into 200 series. After doing more research I possibly might be interested in doing the whole swap (control arms, axles, tie rod ends)

question is for whomever has already done this setup, what is your setup in the rear to "match" the tundra front?

 

[FJRanger]

This is what I did.

Spidertrax Toyota 5 on 150mm x 1-1/4" Thick Wheel Spacer Kit (Pair)

www.spidertrax.com

 

[turbo8]

This is what I did.

Spidertrax Toyota 5 on 150mm x 1-1/4" Thick Wheel Spacer Kit (Pair)

www.spidertrax.com

Same for me

 

[lx200inAR]

One member had an adapter machined to extend the wheel base. Not sure if it was worth the trouble.

 

[FJRanger]

It's the way to go, but would require sourcing Tundra axles.

If @bjowett is still able to get them I considered it when gearing/locking up the rear.