So i daily drive my 40 and i am in the middle of repainting it and stripping the old paint. I have removed all the paint from my hood and she is bare metal showing...and btw the bare medal look is what my son wants. So my question is until i am done sanding down my whole truck what can i do to prevent rust from developing on the cruiser? I parked the 40 here at the office the other day and the sprinklers came on and the next day i little rust areas. Is there something i can spray on there to prevent that from happening?
Prevent from rusting...
- Thread starter BigSur
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Luke111
Supporting Vendor
Put I little primer on it
Lou
Lou
If I read right you want bare metal showing so get the little rust off and spray some clear coat over it. Rattle can should work
when i ordered a body part from CCOT it came in the raw with like a oily substance on it. couldnt tell you what exactly what it is but maybe it can give you somewhere to start. dont know if this helps or not.
yea same thing when you get metal in sheets from a supplier.. bare but coated in a something similar to motor oil.. keeps rust at bay
Luke111
Supporting Vendor
Not really sure what your plans are, but it the end it appears you plan on painting this rig, so I don't understand why you don't just shoot primer to protect the metal. But if you want the bare metal look for a while try this stuff and it appears you can shoot paint on it. I hope this answers your question. Its called Rust Control Clear.
www.chemicar.com
Lou
www.chemicar.com
Lou
