Power button (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 14, 2024
Threads
7
Messages
12
Location
New Jersey
Hey guys , my second start button worke, but the power button doesn’t seem to work. Doesn’t light on the dash and I don’t notice different shift points. Where do I start to figure out how to get it working? Thanks for your help. 98’ lx
 
Hey guys , my second start button worke, but the power button doesn’t seem to work. Doesn’t light on the dash and I don’t notice different shift points. Where do I start to figure out how to get it working? Thanks for your help. 98’ lx
The ect pwr button? Do you see the rpms higher at cruising speed?
 
I'd check the switch and check the bulb on the dash. And realize you're driving a 3 ton tractor built for longevity, not speed, you're not going to notice much with the power button.
 
I might be a minority, but I like the pwr button for my 34.8" tires, puts the shift points back to where I prefer them.
 
Hey guys , my second start button worke, but the power button doesn’t seem to work. Doesn’t light on the dash and I don’t notice different shift points. Where do I start to figure out how to get it working? Thanks for your help. 98’ lx

Hook up to techstream to see if the switch is activating. My light was out too and didn't notice any significant change when engaging so I had assumed it wasn't working. Techstream confirmed is was operational. Like @Trunk Monkey stated, probably not going to notice much of a difference.
 
Where you really notice is at or near wide open throttle. If you’re just puttering around you won’t notice. I leave it engage all the time on pavement.
 
I might be a minority, but I like the pwr button for my 34.8" tires, puts the shift points back to where I prefer them.

I leave it engage all the time on pavement.

Same. And I appreciate it not doing what I'd consider short shifting.
 

Users who are viewing this thread

Back
Top Bottom