I have a 2003 LC with a production date of 10/02. After reading through the thread I'm a little confused as to which ac amp is correct/available. If anyone can shed some light on this it would be appreciated.
post 2003 nav delete how to. (3 Viewers)
- Thread starter jerryb
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
@Tire iron 88650-60810 is for production date 08/2002 - 05/2005
Last edited:
Much appreciated!
glinget, I ordered 88650-60810 from Olathe Toyota - they had 2 in stock! Thank you so much.
Ordered Toyota 55412-60310 - COVER, PLASTIC from amayama today. I still need a couple of parts to order to have a full kit to go forward with conversion. Now need to decide which radio to get... suggestions?
I went with an alpine ilx207. It's more expensive than some pioneer and Kenwood, but I like alpine more, plus its made in Japan, fitting for a Toyota.
I say figure out what you want in your radio,
android auto or car play?
do you need a 9 band parametric EQ? or will a 7 band work alright?
4volt pre-outs?
want multimedia support?
built in gps or not?
I say figure out what you want in your radio,
android auto or car play?
do you need a 9 band parametric EQ? or will a 7 band work alright?
4volt pre-outs?
want multimedia support?
built in gps or not?
I looked up the unit, and gets good review. How is the screen resolution? I want a unit with a fast and responsive GPS independent of a phone and both carplay and android wireless integration. I like Garmin GPS software some units offer, but then read Kenwoods are not snappy. (Slow electronics would bug me) I don't care about CD/DVD, and I am not looking for an "audiophile" grade unit (4volt pre-outs). I still have plenty of time - it took about 4 months to budget for the NAV delete parts, and I figure I should have everything I need by May time frame.
I got this right HERE.
I will be installing in the next month. I'll report back on what I think about it. It checks the boxes that I wanted. As far as recommendations, I will say to be wary of JVC. The last couple of units I had were JVC and they had decent sound quality but were super glitchy, especially with bluetooth, which is a deal breaker for me. Alpine and Sony units have done well for me in the past.
I will be installing in the next month. I'll report back on what I think about it. It checks the boxes that I wanted. As far as recommendations, I will say to be wary of JVC. The last couple of units I had were JVC and they had decent sound quality but were super glitchy, especially with bluetooth, which is a deal breaker for me. Alpine and Sony units have done well for me in the past.
- Thread starter
- #249
I still have a pioneer 8200 (second one) It's been going strong for 15 months so far. Having the extra space that some of those alpines have would be a nice thing. Installation in a LC or LX almost becomes a space for install issue as a brand preference or brand spec issue.
More than a few have told me they didn't think they could get all that in there. deck and steering wheel thing, antenna wires etc. I still wish I would have went with kenwood.
More than a few have told me they didn't think they could get all that in there. deck and steering wheel thing, antenna wires etc. I still wish I would have went with kenwood.
Guys,
am I missing anything for my 2005 LC (10/04 production)
84014-60190
86208-60020
83265-60220
88650-60810
55905-60780
55902-60110
55412-60310
Jerry Harness
83240-60220
55912-60150
90980-12094
90167-30010
Thank you!
am I missing anything for my 2005 LC (10/04 production)
84014-60190
86208-60020
83265-60220
88650-60810
55905-60780
55902-60110
55412-60310
Jerry Harness
83240-60220
55912-60150
90980-12094
90167-30010
Thank you!
- Thread starter
- #252
looks correct, the 9098012094 is part of the harness, you don't need an extra. Your list might be missing a bracket, I see one but not the other.
the toyota double din face plate is bigger, wider than standard double din. The other option is USA standard size, the DFP-11-15 on ebay.
the toyota double din face plate is bigger, wider than standard double din. The other option is USA standard size, the DFP-11-15 on ebay.
Are these NLA now?
Use 86207-60020 and 86208-60020. They are available from Amayama.
Oh, duh! I mixed up the 60030 and 60020. I couldn't find the '30's when I got all my parts so I ended up getting the '20's instead.
On another front, the clock/temp/MPG display face doesn't sit flush against the opening of the DFP-11-15. There is about a 2-3mm gap between the display face and DFP-11-15 trim piece. Has anyone else had this issue? I'm not sure if I want to trim it down or not.
On another front, the clock/temp/MPG display face doesn't sit flush against the opening of the DFP-11-15. There is about a 2-3mm gap between the display face and DFP-11-15 trim piece. Has anyone else had this issue? I'm not sure if I want to trim it down or not.
Hi guys, thank you for the input! I already have the brackets (purchased them back in November of 2018 from amayama both left and right sides right before the harness). I hope the Toyota double din face plate is not going to be a handicap - will I be able to use an adapter of sorts to install a standard stereo or should I just buy the ebay DFP-11-15?
I have a pretty small gap as well, but I have an oversized din chinese fascia. I don’t notice it all though.
- Status
