Parts For Sale, now with pics!

[msahr]

Howdy... I had these parts listed earlier but never got around to taking pictures, until now.

So without further ado:

4 BFG Radial Mud Terrains, 305/70 R 16, Load Range D, 2 very good tread, 2 about
1/3 tread, I never 'wheeled my 80 so I replaced these with ATs. These are pretty
good tires with decent tread. Spares, whatever. $200 obo for 4.

I also have a brand new one that's still on my 80. It's the spare tire, never ran it, just sits
behind the bumper. $175 for that one, new they are $234...

1 BFG Radial Mud Terrain, 31x10.50R15, about 1/4 tread left, decent for spare, $20 OBO.

Passenger seat floor mount bracket for 71 FJ40, may fit other years, in good shape with some very minor surface rust. $50

More on the way...

 

[murf]

your 40

Put A/T's on the 80 I see. Must be a sign that the 40 is getting closer to completion....Remember, you promised to bring it by and show it off. Is the new engine installed and running? Maybe have it done in time for this months Sonic meet? Ill go with you...

 

[msahr]

I went to pick it up Thursday afternoon, only to find out the carb had some issues. Mark's Offroad rebuilt the carb but the throttle body has bad bushings so the throttle plate is loose. He's sending another one. Josh @ Truckwerks will be swapping that out and we're good to go.

I drove it Thursday... power steering and a 4-speed. SCHAWEET!

 

[msahr]

Additional Stuff, pics to follow when I get off this Verizon connection:

2 FJ40 running boards from a 71 FJ40. Includes the lower mounting bracket. See by the pics, there are a couple 'wheeling dents that could be fixed pretty easy. Black in color, $50 / pair

2 FJ40 running boards. Good condition. Includes 1 mounting bracket. $40

Pickup / 4Runner half-doors. Need finishing. Have hinges and latch hardware. Fits 84 - 88 pickup 4Runner (1st-generation 4Runner body style). $100 for the pair.

V6 rear axle. Drum-to-Drum includes rear 3rd, brake drums, etc. SOLD

Spare tire carrier for 71 - era FJ40. In excellent condition, repainted desert tan flat paint (was red), $50

Chrome Toyota pickup rollbar. Good condition, 3" size, includes 4 KC "Competition" lights (KC 4124 on bottom right corner). $50

Aftermarket FJ40 rollbar. Good condition. $40



2F Engine Parts, good for core / rebuild: Block, Head, valve cover, some internal parts (pistons, crank, etc), $100 for all

F Engine, complete, runs fine, had low oil pressure, includes carb, intake, exhaust, valve cover, 3-speed trans, bellhousing, clutch, etc. $500

71 Transfer case, vacuum shifter still works, SOLD

3-speed transfer case floor shift conversion parts. Shifter, bracket, misc. $75

I'm negotiable on this stuff... it needs to go!

ALL THE REST OF THE PICS ARE HERE:

http://s55.photobucket.com/albums/g150/toy4runr85/Parts%20For%20Sale/

All Parts in Tempe or Fountain Hills.

Marc

 

[inkpot]

I went to pick it up Thursday afternoon, only to find out the carb had some issues. Mark's Offroad rebuilt the carb but the throttle body has bad bushings so the throttle plate is loose. He's sending another one. Josh @ Truckwerks will be swapping that out and we're good to go.

I drove it Thursday... power steering and a 4-speed. SCHAWEET!

Howdy! I saw that loose throttle shaft when I was at the shop the other day. I'm kind of surprised that it got out of Mark's Offroad like that. It'll be great to see that baby on the road/trail. I know it's been a long wait for you! John

 

[ratchet]

I'm interested in the 71 tcase and the aftermarket FJ40 roll bar. Could you send pictures of the roll bar to me?
ratchet67rsss@hotmail.com

Is the tcase good or does it need a rebuild? Would you be willing to sell just the nosecone?

Richard

 

[msahr]

Howdy! I saw that loose throttle shaft when I was at the shop the other day. I'm kind of surprised that it got out of Mark's Offroad like that. It'll be great to see that baby on the road/trail. I know it's been a long wait for you! John

Yeah I'm surprised too. Especially after $485... for only $50 more he's sending me a better throttle body. Note to self: Get a specific quote and a Scope of Work before you spend as much to rebuild as a new one costs.

 

[msahr]

I'm interested in the 71 tcase and the aftermarket FJ40 roll bar. Could you send pictures of the roll bar to me?
ratchet67rsss@hotmail.com

Is the tcase good or does it need a rebuild? Would you be willing to sell just the nosecone?

Richard

See above for pics. I'll sell you the nosecone, transfer case included...

It worked fine before it was pulled, even the vacuum shift. I'll be pulling all the vacuum stuff off the body later if you want it.

 

[Cdaniel]

Yeah I'm surprised too. Especially after $485... for only $50 more he's sending me a better throttle body. Note to self: Get a specific quote and a Scope of Work before you spend as much to rebuild as a new one costs.

I'd say that splitting hairs on the cost of throttle shaft bushings or a complete plate if necessary is poor form

A proper carb rebuild includes throttle shaft attention as mandatory.

 

[ratchet]

You have a pm.

Richard

 

[DSRTRDR]

interested in the running boards - I keep using them as sliders and they get bent

 

[msahr]

I still have them...

 

[FJ40LVR]

Mark - do you still have those doors?

 

[msahr]

Mark - do you still have those doors?

Sure do... you want 'em?

 

[FJ40LVR]

Not for me, but my buddy Tim that I introduced you to at payette has decided to SAS his 86, and let me do some other tinkerin' and he is interested, I will have him send you a PM.