For Sale parts for a crawler. (3 Viewers)

[lcwizard]

Vehicle Model

1. 40 Series
2. 45 Series
3. 55 Series
4. 60 Series
5. 70 Series
6. 80 Series

We have a project at our shop a customer obtained in the middle of a build. The previous owner started a build with a 5.3, nv4500 and 5:1 Atlas.
T he new owner would rather have an auto with a 3:1 60 series split case so the 4500 and Atlas are being sold. The whole package, from bellhousing
to transfer, including centerforce clutch and special flywheel were purchase from advance adapters. They were bolt up but never run.
Asking price is 6000. Retail for all was around 8500. The only thing missing is the pilot bearing which was damaged slightly on removal. That bearing is
also an advance adapter piece

 

[cruisermatt]

CT1082 is the GM pilot bearing for this and is about $12

 

[lcwizard]

Advance had supplied an odd configuration that was put in the LS crank. It was a two piece machined sleeves and a needle bearing
that fit inside the sleeves. It appeared to be about 1/4" stand off. The ct1082 looks a lot easier

 

[cruisermatt]

Advance had supplied an odd configuration that was put in the LS crank. It was a two piece machined sleeves and a needle bearing
that fit inside the sleeves. It appeared to be about 1/4" stand off. The ct1082 looks a lot easier

Yep, Advance Adapters is stuck in 1998 with a lot of things

 

[65swb45]

Yep, Advance Adapters is stuck in 1998 with a lot of things

That explains the Orion!