Parting Out Parting out Rust Free White/Gray 1997 80 Series

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Willing to part with just the front oil pump cover?

Thanks

no, I am pretty sure the engine is good. compression test is on my todo list one of these days....
 
I am looking for the gray plastic piece that runs from the ignition switch over the steering wheel and has the mirror controls in the black plastic on the left side. From looking at the picture it appears the piece has the wood trim on it. I am also curious if the square black plastic with the mirror controls has the wood trim on it.
 
Best way to contact me is jason at cruiseryard

Picked up a very nice white/gray 1997 80 series. Texas truck so zero rust. Leather on DS front seat is badly worn, PS front is decent, the rears are good. All stock. The rims on this truck are VERY nice.

Complete album link - Picasa Web Albums - CruiserYard - 1997_LCS_white


IMG_5701.JPG
Do you have the hood lock mechanism assy? And the cable for the hood lock?
 
I am looking for the gray plastic piece that runs from the ignition switch over the steering wheel and has the mirror controls in the black plastic on the left side. From looking at the picture it appears the piece has the wood trim on it. I am also curious if the square black plastic with the mirror controls has the wood trim on it.

the lower bezel is already sold
 
If you have the following two things from your 95 please let me know, I own a 96 Land Cruiser :

1. Antenna assemble, including the base and motor
2. CDL center differential button, if you have that

please let me know how much including shipping to 94538

thanks

Chao
 
I need one rim shipped to 24015. Price please.
 
Have the two pipes that go from the manifold to the catalytic converters along with the o2 sensors? Also interested in the moonroof assembly if you still have it.
 
PMs sent
 
top the to
 
What condition are the front calipers in?
 
Do you still have the HVAC control panel? If so, do you know if all functions worked correctly?
 

Users who are viewing this thread

Back
Top Bottom