Parting Out Parting out a Running 89 FJ62 w ARB Bumper & 189k Miles in New Jersey

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

How much for the firewall ac lines grommet? Also would you sell the upper ac line? The hardline that goes into the evaporator box.
They have sold already sorry
 
Interested in all of the door lock cylinders (rear hatch, driver, passenger, ignition, gas cap, glove box) if you have them. Also need this retaining clip for the rear hatch motor to connect to the rear hatch lock.

Screenshot 2025-06-03 at 2.35.38 PM.png
 
Interested in all of the door lock cylinders (rear hatch, driver, passenger, ignition, gas cap, glove box) if you have them. Also need this retaining clip for the rear hatch motor to connect to the rear hatch lock.

View attachment 3921013
Pm sent
 
Hey I’m going to start parting out a 89 FJ62 this weekend that runs and drive but has no brakes. All “4” windows go up and down with their switches on the door and the main switch panel on the driver door. The front wipers work well and so does the rear wiper motor work on both speeds. The dash pad, dash, front & rear plastic seat belt covers, and door panels are all in good shape. The frame is bad and most of the body panels are as well. If you need a part or have a question just let me know

Truck & parts are in New Jersey

Parts below have sold already

- Dash bezel
- Dash Pad
- Front & Rear window motors and regulators
- Brake Pedal
- Front Grill, turn signals , bezels , marker lights
- Front Wiper motor
- Front Driveshaft
- Transfer Case
- rear bench seat
- arb bumper
- stock front bu




Hello, do you still have the emissions equipment available?
I'm interested in all the engine emissions equipment and the downpipes up to the cats (cats too if they are not federal). I'm getting my 89 smogged in California and am missing a few of the parts.
 
Pm sent
 
Bump

IMG_8180.webp


IMG_8178.webp


IMG_8177.webp


IMG_8179.webp


IMG_8183.webp


IMG_8182.webp


IMG_8181.webp
 

Users who are viewing this thread

Back
Top Bottom