Parting out 95 FZJ80 (1 Viewer)

[Koffer]

Location

United States

Im parting out a 3 of 95 gray interor gray 2 tone outside with difflocks .
I will list things missing/broken/trashed that I can think of , everything else is available.

Things missing or broke

all outside lights
rear bumper ends
hood/front fenders (pretty much anything hooked to the core support)
Front rug (bio hazzard ,yes blood)
front door panels and drivers rear
Pass side outside mirror.


Now for the big thing you all want to know about for sale

The diff locks will be offered as a system
I will sell them with the switch,ecu,harnesses needed , front and rear housings hub to hub with all bits but the brake calipers,ABS sensors and harness.
The other thing with this is that the truck was in a front impact hard enough to bend the frame and bent one of the trailing arms so the front is sold a donor for you to put in your good one as I can not say this one was not bent .

Look at the pics to get a idea of what it had been through.

$2500+ shipping, cheaper if picked up in Trenton N.J.

The motor and trans are also for sale, but Im going to try to get it to run before I post prices and get a compression test


I also do not do this as a 9to5 (my 9to5 is 10am till done and this is my busy time)so shipping prices and other things wont be done as soon as you email me . I dont mean to sound blunt ,but if your looking for it next day and brand new please use the same person I do , Cdan

I will take pics of the items you ask about and workout a price from them with you .

Thanks

 

[Junk]

PM sent ya fawker

 

[muddogbob]

I'm looking for a rear axle assemby w/o third member.

 

[kayros]

How's the driver side mirror? hit me offline for the price.

 

[Silicon 70]

Did the wheels and tires survive the accident?

 

[Koffer]

Did the wheels and tires survive the accident?

Both front tires blew out and the rims up front took a beating as for the others they need to be washed to see what kind of shape they are in .

 

[mooker82]

Hows the rear drivers side bumper end cap? If its in good shape i'm interested.

 

[Koffer]

Hows the rear drivers side bumper end cap? If its in good shape i'm interested.

The bumper ends in the rear are shot ( I update the 1st post ,the drivers side wasn't till the wrecker driver killed it bringing it to the shop, that dick )

 

[semlin]

pm coming your way

 

[SunTzuMD]

PM sent - looking for PS sun visor.

 

[Arya Ebrahimi]

Koffer, if you're willing to split up the the axles and stuff and the front looks straight enough for a trail rig, then lemme know how much you'd want for it. Be interested in the whole thing from hub to hub including discs and calipers. Thanks

Ary

 

[Boston Mangler]

PM Sent, please reply, i got cash!

 

[Koffer]

stuff sold so far Update

Ok heres what sold so far
1)all the rims that were good
2) switches ,hazzard,rear heater,ant.switch

Things on hold
rear seatbelts,p/s visor,mirror,rear gate,front diff ,locker wiring

 

[Boston Mangler]

Ok heres what sold so far
1)all the rims that were good
2) switches ,hazzard,rear heater,ant.switch

Things on hold
rear seatbelts,p/s visor,mirror,rear gate

What about me

 

[4x4CPOSEADOG]

How much for the front and rear sway bars rods, not the bracket but the rod that is attached to the bracket with bushings? Also would like to know if you have the front tow hooks attached to the front frame?

Since you got frontal hit, what is the condition of the front differential?

 

[convert]

What about the rear carpet, and the two piece steering wheel column cover?

 

[Koffer]

front hit pics

heres the front where it was hit

 

[Land Speeder]

I like what is circled in the pic below for the pasengers side.

 

[Koffer]

I like what is circled in the pic below for the pasengers side.

I know they are there and the top one is good I need to look at the bottem one to see if it is ok too

 

[Land Speeder]

I know they are there and the top one is good H need to look at the bottem one to see if it is ok too

Excellent, I'm mostly looking for that vertical part that is "vent-like" with it's back rubber...