I know you mentioned the doors as gonners, but do you by any chance have the stock wiring from the factory speaker to the connector(short piece, just need side that is connected to speaker). So yeah, don't need speaker, only wire and plug. Lemme know please. thanks.
-
Updated Classifieds system, post your NEW classifieds here - IH8MUD Classifieds
Parting out 95 FZJ80
- Thread starter Koffer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Land Speeder said:
Hey Todd, do you have the left side (driver side) of this part? I just need the vertical vent part. Thanks!!
Hsian
do ya have a right side wiper arm? if so, how much? 
Turns out I need the window guide and the exteroir weatherstrip. Also if you still have the third brake light, I want that too.
I need the rear passeger side(right side) window motor regulator too. Let me know how much is it. Thanks!!
Hsian
Hsian
Todd,
Got the seat belts. Excellent!!!
BTW, thanks for the New Jersey reading. ;-P
Thanks again,
Jim
Got the seat belts. Excellent!!!
BTW, thanks for the New Jersey reading. ;-P
Thanks again,
Jim
for packing to ship it or I might look a little 
not thats theres anything wrong with that 
Todd,]
I need the front hooks with a red circle in this picture. How much are they if shipped to 23320? Thanks
I need the front hooks with a red circle in this picture. How much are they if shipped to 23320? Thanks
Last edited:
Do you have the 2nd and 3rd row overhead grab handles.. I'm really only looking for the screw covers on them, but could take the whole handle if needs be. Also do you know if they are the same in a 95 as compared to a 94 ?
THanks,
-Gary
THanks,
-Gary
I need (if you still have the parts from the wrecked Cruiser)
1) the rear tail gate lock button "knob" that screws onto the metal post for the door lock mechanism... Mine is missing and every time you lock the vehicle, the metal post goes under the rear tailgate plastic and when it's unlocked, it jams up...
2) the screws or nuts that hold down the plastic "steps" found on each side of the 2nd row of rear seats... mine are all missing and those steps just pop off and fly around back there... These are located directly on each side of the rear seats when the doors are opened. There should be (4) all together (2 per side)
3) all of the mounting bolts/hardware that secures the 3rd row of seats to the tops of the inner rear wheel wells (or floor)... The previous owner gave me the 3rd row jumper seats, but no hardware to secure them! D'OH!!!!! I don't know how many bolts, nuts, etc, but I need all the hardware that mounts them to the floor
4) damage free/drill free center console - possibly whole unit depending on price
5) 4x4 shifter knob & 4x4 leatherette boot (as long as they are damage free)
6) the cloth speaker grill covers mounted on each side of the lower dash (as long as they are not ripped or damaged)
7) OEM speaker grills for the doors (all)
8) if they are any left, the under hood liner fasteners - I need as many as you can remove that are not damaged
9) is the metal rear bumepr straight - if so, how much just for the metal assembly w/o the end "wings"?
10) any OEM running boards? could not see too well with the pics posted
I REALLY need items 1-8 to fix the those areas on my Cruiser. I may be interested in 9, depending on the condition and if damage/bent free.
I'm in NJ too out by Atco Raceway.
Thanks!! Please feel free to PM me with total price, including shipping.
1) the rear tail gate lock button "knob" that screws onto the metal post for the door lock mechanism... Mine is missing and every time you lock the vehicle, the metal post goes under the rear tailgate plastic and when it's unlocked, it jams up...
2) the screws or nuts that hold down the plastic "steps" found on each side of the 2nd row of rear seats... mine are all missing and those steps just pop off and fly around back there... These are located directly on each side of the rear seats when the doors are opened. There should be (4) all together (2 per side)
3) all of the mounting bolts/hardware that secures the 3rd row of seats to the tops of the inner rear wheel wells (or floor)... The previous owner gave me the 3rd row jumper seats, but no hardware to secure them! D'OH!!!!! I don't know how many bolts, nuts, etc, but I need all the hardware that mounts them to the floor
4) damage free/drill free center console - possibly whole unit depending on price
5) 4x4 shifter knob & 4x4 leatherette boot (as long as they are damage free)
6) the cloth speaker grill covers mounted on each side of the lower dash (as long as they are not ripped or damaged)
7) OEM speaker grills for the doors (all)
8) if they are any left, the under hood liner fasteners - I need as many as you can remove that are not damaged
9) is the metal rear bumepr straight - if so, how much just for the metal assembly w/o the end "wings"?
10) any OEM running boards? could not see too well with the pics posted
I REALLY need items 1-8 to fix the those areas on my Cruiser. I may be interested in 9, depending on the condition and if damage/bent free.
I'm in NJ too out by Atco Raceway.
Thanks!! Please feel free to PM me with total price, including shipping.
Is the radio antenna any good, if so..how much shipped to 28001?