Parting out 95 FZJ80

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Josh83 said:
Can I get a price for both passenger side lock actuators pm'd please? I could pick them up in a couple of weeks.

I need to look if they are still there as the front doors had someone in them .

I'll be headed down to look on monday
 
beno said:
Hey Koffer:

How much for both front and rear drive shafts? Are they in good condition (ie: how many miles on the rig before the total?).

I can pick up in Jersey.

Thanks man.
-onur
Akron, OH

$100 each or $180 for both
Died at 120K
 
Motor and Trans/transfer

I got the motor running today. Runs great. no smoke ,good oil press .ran a code check on it while it was running and the crank sensor code was showing . It most likely bit the dust in when it got hit as the rad was wrapped around the fan and dizzy. I didnt run it for long since the rad was shot and the p/s and trans fluid was leaking bady.

Motor and trans are forsale
Motor is from intake to oil pan $1100
Trans/transfer $1100
take all 3 for $2000
 
Hey Todd

Hit me up with an email about the stuff we discussed

Thanks Man
Kevin
 
Forget the springs I reealy need the window guide on the Driver's Side( the hard rubber part the window travels on when it goes up and down. ) Let me know how much.
 
DigitalKnight86 said:
Forget the springs I reealy need the window guide on the Driver's Side( the hard rubber part the window travels on when it goes up and down. ) Let me know how much.

Need to see if its still in the door as the drivers window glass was removed when I got the truck as I think a junkyard jocky pulled the window motor
 
You have more stuff than that sold :D

Let me know when you want paypal and when I can swing on down like the wild tarzan that I am :D
 
Junk said:
You have more stuff than that sold :D

Let me know when you want paypal and when I can swing on down like the wild tarzan that I am :D

Yeah I got some of that crap you wanted off . BTW its going to cost you more as I needed to use a crow bar to get the custom front bumper off :flipoff2:
 
call me if the lockers and axels are avalible im on down the road from you and would like to get this from you if price is right you can reach me at 215 760 3363 my name is AAron and im just across the delaware .
 
call me if the lockers and axels are avalible im on down the road from you and would like to get this from you if price is right you can reach me at 215 760 3363 my name is AAron and im just across the delaware .
 
sent you a PM about the temp gage.
 
Back
Top Bottom