yodafrick
Cruiserhead
Can anyone look at this for me? I want it. There's a case of your favorite beer in it for you
Try pat (fj40moneypit). It may be near him...what town is it in?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Can anyone look at this for me? I want it. There's a case of your favorite beer in it for you
Try pat (fj40moneypit). It may be near him...what town is it in?
I bought these a few years back for a 96 Tacoma and no longer need them. They were run for two years only, and only for street use.
15 x 8 with 4.5 inch backspacing. Read more about them here: Custom Toyota Wheels from Wheeler's Off-Road
$150
Selling a 34qt Engel fridge/freezer. Has a very small dent. Works perfectly. Won't be able to use it much since I'll be in grad school for the next 3 years. $300 I'll get some pics up soon.
Would like but NYC is too far to pick up. Are you up no'th much?
I'm from RI and will probably be up there next weekend. Where are you?
Decent condition. Contact me through the ad since I'm not on here that much lately. Will take PayPal and can bring to May's event at Gretchen's.
http://nh.craigslist.org/pts/3753224255.html
Hi All, this hurts me to do, but I am selling my rig...
It has been sitting for 2 years, had an issue staying running, but narrowed it down to
either a bad fuel pressure regulator or bad ground, or bad fuel pump, or bad starter solenoid.
I don't have time to deal with it anymore, and if I don't sell it this weekend, I will tow it with me
on my move.
here is what it has:
**oh engine and all driveline parts (except for transmission which has 110K on it) ONLY have 3K miles
on them!**
1986 4runner 5-Speed
Performance 22RE:
(Bored .020) over with Forged pistons
Moly rings
Severe duty crankshaft
high flow ported and polished head, with oversized SS valves,
performance camshaft
ADJ Cam gear
rebuilt injectors
94 Intake, with enlarged t-body
LC headers, and 2 1/4 exhaust
York on board air with 5 gallon air tank
Factory A/C
V6 Brake Master
SAS
w/ Marlin x-over steering and FJ80 ends
Bobby Long Birfields
Front axle shaved 1" w/ 1/4 skid plate welded on
FJ80 Hi--pinion Elocker with 5.29 yukon gears
High angle driveline front CV driveshaft with 1/4 wall tubing, and long travel splines
Marlin DUAL T-Cases with 2.28 in front, and 4.7's in rear for 228:1 crawl ratio
Rear 1/4 wall HD driveshaft
1999 V6 Rear Diff w/ fact. e-locker running 5.29 Yukon gears
2" lift AOR front and rear springs with Orbit eyes
2" 4Crawler body lift and engine lift
Budbuilt dual tcase crossmember
Gas tank lifted 2"
Rockstomper front shock hoops
Bilstein 5100 14" travel shocks
35" BFG muds
Fabtech front fiberglass fenders
rear quarters cut 2" out and welded for clearance
custom rear bumper 1/4 wall square tubing wrap around, with tow shackles
custom rock sliders from from 1/4 wall welded to frame with 1/2" plates on frame.
Wet okole seat covers
PLease contact me if you are interested....
I won't consider rediculously low ball offers, I will tow it with me instead, if I don't sell it.
Located in So. Maine
Sellin a 93 unlocked 80 if anyone is interested. Check in the classified section. Lower price for ytoys...
86rocktoy said:Sorry, price is $3000 OBRO