Official ONSC member buying/selling thread (10 Viewers)

[FJEnthusiast123]

Still looking for a set of hardtop sides for the 40 that are rust free and/or in good shape. Also if anybody's got a set of amby doors or front doors that have good bottoms or tops (on the ambulance doors) that they'd be looking to get rid of then I'm interested. That way I could chop off the bottoms and have them welded into my doors. Or do y'all think I'm better off buying the patch panels for all the doors? Interested in the soft top route too so if anyone has one let me know.


...via IH8MUD app

 

[lt1fire]

johnny i'll most likely ask you if you still have those adapters sometime next year. I'm thinking of going back to a 16.5 rim size with multiple tire sizes but not 100%

 

[krzyabncanuck]

Buy the patch panels. They are good.

 

[NCFJ]

I am with Darin, go with the patch panels. Either way you are cutting and patching unless you are fortunate enough to find perfect doors and you will pay dearly for them.

 

[NCFJ]

Not mine, not a bad price for an 80

http://charlotte.craigslist.org/cto/4744158869.html

 

[CharlestonG8R]

Not mine, not a bad price for an 80

http://charlotte.craigslist.org/cto/4744158869.html

OH man! I am passing this on to Mark! That's a great price - I might need to consider it just for the lockers. @psbarger

 

[GLTHFJ60]

Next up, a natural gas freestanding fireplace with double-insulated chimney. Took out the chimney due to a rainwater leak running down the outside of the chimney and decided to remove the fireplace alltogether as we haven't used it in a year.

*Have never used it myself. Was told it worked when house purchased a year ago, have not attempted to use since.*

Only price estimate I can find is here, up to $1500.
http://www.liveauctioneers.com/item/21803208_vermont-radiance-gas-heater-model-2600

It's heavy as heck! Make me an offer and come to pick it up!!

Comes with chimney parts as well as the above-roof portion if you want it.

 

[GLTHFJ60]

It's on craigslist now, still OBO.

http://raleigh.craigslist.org/hsh/4768767594.html

 

[NCFJ]

Lowered price to $4,500.00 OBO

I thought I would grow accustomed to it, but the reality is I am too big for a small truck. I am selling my 88 4RNR. This is a first Gen, which means the top comes off. All stock except wheels and tires and Corbeau seats. Timing chain, timing chain cover, water pump and oil pump were all replaced about 2,500 miles ago. 246K miles on the 22RE with 5 speed. Truck runs great has a couple dents that should pound out without much trouble. Tires are BFG AT with 9K miles on them mounted on Tundra 16" wheels. No rear bumper. Back window operates well. A little TLC and some paint and this will be a very sharp truck. Last offer I had was $5,500.00 in March.

$4,500.00 Clean title

 

[onemanarmy]

good deal, but I can't afford 2 of them.

 

[Mtbcoach]

Dang, wish I had a good excuse to buy another vehicle...

 

[CharlestonG8R]

Wanted: A solid floor jack. Does anyone have any suggestions? I tried the inexpensive Autozone special, but it died pretty quickly...

 

[NCFJ]

Dang, wish I had a good excuse to buy another vehicle...

Since when do you need an excuse

 

[krzyabncanuck]

I have had my Napa floor jack for over a decade now and it still puts my one ton front end in the air just fine.

 

[lowtops]

Long shot here but I'm looking for a factory 2F air cleaner housing.

 

[GLTHFJ60]

Long shot here but I'm looking for a factory 2F air cleaner housing.

You're going to have to specify the exact year and model, because there were a bunch of different style 2F air cleaner housings depending on the model and year.

(I try to never make assumptions, such as that you're talking about your 1977 FJ40 and you want a stock air cleaner from that specific truck)

 

[lowtops]

You're going to have to specify the exact year and model, because there were a bunch of different style 2F air cleaner housings depending on the model and year.

(I try to never make assumptions, such as that you're talking about your 1977 FJ40 and you want a stock air cleaner from that specific truck)

I thought that's what sig lines were for?
Yes, I'm looking for a factory air cleaner housing for a 1977 FJ40LV KCJA

 

[elkaholic]

Sig lines do not show up in the iPad and iPhone apps

Just sayin ....

 

[krzyabncanuck]

Most of us on here can not see Sig lines on our phones / tablets.

 

[Mhall]

I have an ICOM 208H ham radio setup for sale. It was installed in my FJ when i bought it, need to sell in order to fund some other bank account draining upgrades I am doing. It has a detachable face and includes everything you need for a nice clean install. Price is $200 and includes the speaker in the picture as well.

.