I've got a guy in Durham Wednesday but you'd need to come to him. Maybe again on 11/16. And again on 11/21-22. Ya know, if that's more convenient.
...via IH8MUD app
Official ONSC member buying/selling thread
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
...via IH8MUD app
That would be more convenient. Where would I meet him, up at DPAC? Time?
I got a new small compressor so I plan on selling mm the one I have pretty cheap. It's a little ACDelco.
Sorry about the terrible pic.
$50?
Sorry about the terrible pic.
$50?
What day are you thinking? That dictates location. Give me a call to discuss. FYI - Wednesday is Carolina Theatre on W. Morgan St.
- Joined
- Jan 16, 2003
- Threads
- 345
- Messages
- 3,656
- Location
- Charleston
- Website
- www.oldenorthstatecruisers.com
- Thread starter
- #5,685
What's the condition of the propane system your pulling out? Might be interested
Phil and I have a coworker that is looking for an FZJ80 with lockers. He wants it specifically for wheeling, so it doesn't need to be in perfect condition. He also likes working on cars, so he's not terribly concerned if it has to be towed back to Charleston or if it can be driven.
Since I asked and you replied to me, please let me know. Thanks man.
I meant to tell you, we couldn't find a license plate bracket on @scott johnson 's FJ40. It could still be there, if Scott pulled it, but we didn't see it. Sorry!
Is anyone interested in buying a Whirlpool top load washer & front load dryer?
I got the Mrs. a new pair.
I got the Mrs. a new pair.
if anyone is interested....i have my 1973 FJ-40 up for sale.
it is listed in the main BJ40 | FJ40 listings. or just shoot me a note here.
it is listed in the main BJ40 | FJ40 listings. or just shoot me a note here.
Couple of things to give away, because I've attempted to sell but have been unsuccessful. I need this stuff out of my garage. If it's not gone by the december trip, I'll throw it out.
[STRIKE]Factory 2F valve cover that's free of cracks. Has been ceramic coated white on the outside. Could not be cleaner on the inside.[/STRIKE]
Remnants of an 80 series body and engine harness. No, I do not remember which specific truck this came out of (fj80/fzj80). Has been picked over by two cruiserheads already for misc connectors and whatnot.
ONE THING TO SELL:
6x5.5 lug to 8x6.5 two-piece adapters+spacers. These spacers are machined specifically for the Toyota front hubs to maintain maximum strength. Each set of adapters comes with inner lug nuts and allen bolts to bolt the two pieces together. Assembly is as follows:
- Remove 6 lug wheel and install inner half of adapter with supplied lug nuts to 100lb/ft (with loc-tite)
***LUGS MUST NOT PROTRUDE FROM INNER HALF***
- Install outer half, ensuring that indexing dowels are lined up
- Install all allen bolts and torque to 60lb/ft (without loc-tite)
- install 8 lug wheel as normal
- After 200 miles, remove outer half, retorque inner lug nuts (more or less checking to see they're not loose) and then reinstall allen bolts with loc-tite.
Price is $150. Extremely high quality. Try to find another two-piece wheel adapter set that uses 8 allen bolts to hold the two halves together
Fuzzy picture, but they are 2" thick.
[STRIKE]Factory 2F valve cover that's free of cracks. Has been ceramic coated white on the outside. Could not be cleaner on the inside.[/STRIKE]
Remnants of an 80 series body and engine harness. No, I do not remember which specific truck this came out of (fj80/fzj80). Has been picked over by two cruiserheads already for misc connectors and whatnot.
ONE THING TO SELL:
6x5.5 lug to 8x6.5 two-piece adapters+spacers. These spacers are machined specifically for the Toyota front hubs to maintain maximum strength. Each set of adapters comes with inner lug nuts and allen bolts to bolt the two pieces together. Assembly is as follows:
- Remove 6 lug wheel and install inner half of adapter with supplied lug nuts to 100lb/ft (with loc-tite)
***LUGS MUST NOT PROTRUDE FROM INNER HALF***
- Install outer half, ensuring that indexing dowels are lined up
- Install all allen bolts and torque to 60lb/ft (without loc-tite)
- install 8 lug wheel as normal
- After 200 miles, remove outer half, retorque inner lug nuts (more or less checking to see they're not loose) and then reinstall allen bolts with loc-tite.
Price is $150. Extremely high quality. Try to find another two-piece wheel adapter set that uses 8 allen bolts to hold the two halves together
Fuzzy picture, but they are 2" thick.
Last edited:
i'll take the valve cover if no one else has claimed it
It's yours.
i'll even throw in a beer or 2 
$22k OBO
-1973 FJ40 ~800 miles on conversion
-small block chevy 350 fuel injected motor w 7k miles
-turbo 400 auto transmission
-two stick transfer case
-spring over axle conversion
-new racing seats
-American racing wheels
-disc brakes front
-vintage A/C installed [$3k option alone]
-new gauges
-4 point seat belts
-roll cage installed
-custom audio system
any pics ??