Malleus
Far west of Siegen
Any 80's? I checked their site, but you can't search for a model, only a part.
Official ONSC member buying/selling thread (29 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I wish I could tell you.....they are pretty good via email and definitely on the phone, though - could probably tell you right away (I know, not very helpful
).
Last edited:
I'm looking a running, carb'd 350 (or similar) with manual trans bolted to it for a project.....
Thanks
Thanks
It appears you can get one style from Walmart. It got a terrible review and strangely appears to have a remote control.
Lil’ Rider
NCFJ
Supporting Vendor
I just spent a bit of time on BringaTrailer.com. Seems like the price for 40s is down while the price of 80s are really starting to climb. 60/62s are the current king of the hill with high prices across the board. If you have a 60 series you have been thinking of selling now is a great time. I think it is time for me to build out the two 62s I have sitting, waiting. Both will go on 80 rollers with a swap etc.
60s with a V8 swap, but keeping leaf springs and the proper width axles are where its at. Keeps the look, manners, and ruggedness of the 60 with the modern engine drivability.
Malleus
Far west of Siegen
By down, do you mean, below $80k?
Malleus
Far west of Siegen
Patrick, if you go to Pull-a-Part in Charlotte to get the gate, would you mind pulling the mounting bolts off the blanks where the roof rack would be? They're T35 or T40, I can't remember which. I want to pull the rack off my '00 LX470, and I don't want to plug the holes with the long bolts used to mount the rack. Toyota used shorter ones as hole plugs, but they're not on the parts list (must have been a port installed part). I forgot to get them the last time I was there.
I'll make it worth your while
Sorry man, my buddy went there yesterday but said the tailgate was rusted throughPatrick, if you go to Pull-a-Part in Charlotte to get the gate, would you mind pulling the mounting bolts off the blanks where the roof rack would be? They're T35 or T40, I can't remember which. I want to pull the rack off my '00 LX470, and I don't want to plug the holes with the long bolts used to mount the rack. Toyota used shorter ones as hole plugs, but they're not on the parts list (must have been a port installed part). I forgot to get them the last time I was there.
I'll make it worth your while
Malleus
Far west of Siegen
Sorry, I thought you wanted the lift gate. We may not be talking about the same truck; IIRC, the tailgate was gone long ago. And there was zero rust on this truck that I could see.
Last edited:
Malleus
Far west of Siegen
I'm searching for a good Charlotte area bodyshop that can repaint my '94 green hood. The clearcoat is nasty, but the paint and panel are in good shape. I plan to strip the extra bits and remove/reinstall it myself.
I used to take all my work to Town & Country, because the bodyshop manager and staff were excellent, but they've hired a new "master paint specialist" who knows so much more than you about painting that he doesn't need to listen to you when you tell him what you want. He actually told me he needed to match the faded paint on the body and had to charge extra for the effort.
I'm not worried about price, I only care about quality. Supposedly there is a really good custom/restoration shop somewhere in Charlotte, but I can't find it. I really don't want to deal with a shop that, like most of the industry, lives off of insurance claims.
I used to take all my work to Town & Country, because the bodyshop manager and staff were excellent, but they've hired a new "master paint specialist" who knows so much more than you about painting that he doesn't need to listen to you when you tell him what you want. He actually told me he needed to match the faded paint on the body and had to charge extra for the effort.
I'm not worried about price, I only care about quality. Supposedly there is a really good custom/restoration shop somewhere in Charlotte, but I can't find it. I really don't want to deal with a shop that, like most of the industry, lives off of insurance claims.
You do have to match the faded paint color for a good partial repaint. If you're painting the whole truck, doesn't matter, but if you're only painting a panel or two, you have to match, or else you'll have a multicolor truck.
I have been happy with Carsmetics for several of my vehicles. They are not insurance claim type of place. Good reviews and nice staff.
Malleus
Far west of Siegen
I follow you, but I told him I was planning to have the whole truck repainted next summer, and I just wanted to start with the hood. It's my daughter's truck and the nasty clearcoat irritates her becasue it's in her face teh whole time she's driving. I sympathize completely; she gets her OCD from me.
Malleus
Far west of Siegen
Thanks, I'll talk to them this week and see where that takes me.
NCFJ
Supporting Vendor
Real easy to keep the wheels tucked with proper back spacing on the wheels. 60s on 80 frames sell for a lot more money, and that is why I am building them.
Time to pass on the Gaucho. Free to any member that can use it. Bought it new 5 years ago and it has been rode hard and put up wet LOL. Pretty sure it still functions but hasn’t been used much in a while. Located in Madison
gaap master
SILVER Star
Glad to hear that...planning to put my 60 up for sale shortly.
forrest5000
SILVER Star
ill.take it
jfz80
Cruisin’
Pirate4run is who I was saying posted a wantEd ad here last week if Eric passes
