Official ONSC member buying/selling thread (27 Viewers)

[S4Cruiser]

@S4Cruiser When do you think you'll have it finished by? I am moving into a new place where I'll be able to set up a workshop and a good bench and strong vice are top priority for me. I'd likely build or shop for a bench specifically for whatever vice I get and that one looks like it has some real potential.

I worked on it a bit yesterday evening and got the dynamic and stationary pieces separated. Next step will be scrubbing in the parts washer then media blasting the non machined portions. I should be able to have it done in a few weeks, weather depending. Not sure if I want to paint it or stick with a boiled linseed oil finish.

 

[jamesurq]

Belleview winch - winch and line in great functional and asthetic condition - especially with how old it is.
This is the pre-curser to the 8274 winch - looks very similar to it. Would make an awesome winch for an early 40 series since it's made prior to 1974. Excellent shape. The in truck control panel could use some cleaning up/repair.

I was planning on putting it on the 40 since it's a 69 - and putting my 8274 from the late 70's on the 60, but the more I contemplate things, a low profile newer winch will be a LOT less work to fit on the 60...

Asking what I paid, and you come get it: $500

 

[pkniland]

Team ONSC - Any leads on used winches much appreciated. This is for the 04 100. Thank you.

I have a superwinch LP10000 that’s been on the 80 for 4 years. Metal cable had to hack up the control box a bit. $100

 

[4LowandSlow]

2006 Toyota Tacoma. 2.7L 4 cylinder. 5 speed manual. 214k miles. Rust free excluding a couple minor spots that I’ll address on the body. Frame is super clean and rust free. Paint is in great condition as is the interior. The hood has some clear coat peeling that I’m gonna address. Has new coils and spark plugs. 02 sensor. Valve cover gasket. Fresh fluid. Previous owner put new tires and rims on it. Has a new fuel injection harness work done at Toyota by previous owner. I’ve put 5k miles on it since I bought it. It’s been nothing short of reliable and comfortable. I’ve been daily driving it and have no complaints other then I need a diesel to haul around toys. Asking 7500 OBO I’ll get better pictures in the morning

 

[weejub]

SOLD

 

[4LowandSlow]

2006 Toyota Tacoma. 2.7L 4 cylinder. 5 speed manual. 214k miles. Rust free excluding a couple minor spots that I’ll address on the body. Frame is super clean and rust free. Paint is in great condition as is the interior. The hood has some clear coat peeling that I’m gonna address. Has new coils and spark plugs. 02 sensor. Valve cover gasket. Fresh fluid. Previous owner put new tires and rims on it. Has a new fuel injection harness work done at Toyota by previous owner. I’ve put 5k miles on it since I bought it. It’s been nothing short of reliable and comfortable. I’ve been daily driving it and have no complaints other then I need a diesel to haul around toys. Asking 7500 OBO I’ll get better pictures in the morning
View attachment 2235382

 

[4LowandSlow]

View attachment 2236050View attachment 2236051View attachment 2236052View attachment 2236054View attachment 2236055

 

[weejub]

SOLD Item

 

[joecrow]

I have a superwinch LP10000 that’s been on the 80 for 4 years. Metal cable had to hack up the control box a bit. $100

If @uzj100 isnt interested I am

 

[angerhater]

me too...

 

[uzj100]

If @uzj100 isnt interested I am

I am passing on the winch.

 

[pawwright]

*SOLD* .....I don't want to list of craigslist, please ) - link goes to posting for truck, though it doesn't show correctly below for some odd reason....

1990 Toyota Pickup 4x4 DLX with 3VZE, approx 224K, 5 speed - owned since 2015

Official ONSC member buying/selling thread

How’s this? Looks perfect! (or it should after a little spray paint) How much? Trade for beer?

forum.ih8mud.com

 

[jynx]

Price changed to $1800.....I don't want to list of craigslist, please ) - link goes to posting for truck, though it doesn't show correctly below for some odd reason....

1990 Toyota Pickup 4x4 DLX with 3VZE, approx 224K, 5 speed - owned since 2015

Official ONSC member buying/selling thread

How’s this? Looks perfect! (or it should after a little spray paint) How much? Trade for beer?

forum.ih8mud.com

Interested. Checking with holder of the checkbook currently. She wants a "shop truck". I will PM you later today.

Thanks,

Matthew

 

[S4Cruiser]

Husky tool box top and bottom combo. Very nice shape and hasn’t seen much use. $150

 

[Pick]

Husky tool box top and bottom combo. Very nice shape and hasn’t seen much use. $150

View attachment 2238733View attachment 2238734

Dimensions?? or model number/online link

 

[S4Cruiser]

Dimensions?? or model number/online link

I looked for the model in my files and can’t find it. I’ll measure tomorrow. If your local and can pick up then how about a Coronavirus discount?

$100 picked up!

 

[ROBsSON]

I looked for the model in my files and can’t find it. I’ll measure tomorrow. If your local and can pick up then how about a Coronavirus discount?

$100 picked up!

Twist my arm if it’s not claimed I’ll take it

 

[S4Cruiser]

Dimensions?? or model number/online link

Top:
26” W
16” D
19” H

Bottom:
27” W
18.5” D
37.5” T

@Pick - you hive first dibs.

 

[Pick]

Top:
26” W
16” D
19” H

Bottom:
27” W
18.5” D
37.5” T

@Pick - you hive first dibs.

I need something a little bigger.... I'll defer to @WhiteTiger911

 

[KliersLC]

Hey all, it looks like I'll be moving into a 100. 80 is for sale.

SOLD - 1997 Collectors Edition, Virginia Beach. (reduced price)

Hi folks. I regretted selling my last 80 and will likely regret selling this one. However, it seems like it is time to move on to a 100 series. The Good: -1997 Collectors Edition -263,000 -Two tone Gray with Oak interior (quite possibly the rarest and most desirable color combination) -Disco...

forum.ih8mud.com

Still available, asking 6k. Can deliver to the relic run.....