I got the NWTI winch bumper kit and am pleased with it. It went together easy and looks good when finished. The only problem with mine is some ugly welds since all I have is an old Lincoln 225 amp A/C buzz box. Here are some pictures of the process.
NWTI Bumper Kit Build
- Thread starter gnarlytoes
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
- Thread starter
- #3
It took a while to grind down all the welds and splatter getting it ready for paint.
- Thread starter
- #4
Finished!
cc93cruiser
CRUZAHEAD
Great job, what does a kit like this go for?
- Thread starter
- #6
1990 - 1997 FJ80/FZJ80 winch bumper kit
$420 plus shipping. Shipping was $130 from WA to TN. I guess another $100 for welding rods, grinder discs, and paint. So about $650 total when all is said and done.
Looks great! And familiar 
although I don't have a winch in mine yet...
One thing I thought about doing on mine, and may yet still do, is adding another triangle piece on the bottom of the wing. Seems like this is a natural weak point, and from the side, it just looks like there should be another piece in there too fill it in. Probably do that when I add a winch.
although I don't have a winch in mine yet...One thing I thought about doing on mine, and may yet still do, is adding another triangle piece on the bottom of the wing. Seems like this is a natural weak point, and from the side, it just looks like there should be another piece in there too fill it in. Probably do that when I add a winch.
About how much time did it take to put together and finish up?
- Thread starter
- #9
I probably had a total of about 8 hours in it over a couple of days.
sleepycruiser
I will get by….I will survive -Touch of Grey LC200
Does this protect the AC drier? I couldn't find that info on their site.
- Thread starter
- #11
Mine is a '92, so the AC dryer is up next to the radiator. Just looking at the bumper, I think you would need to relocate the dryer on a '93 to '97.
sleepycruiser
I will get by….I will survive -Touch of Grey LC200
Thanks. How do you like the bumper so far? Heavy duty?
nice. looking / functional bumper. do they have a rear bumper kit?
- Thread starter
- #14
I like it so far, but have not had to use the winch for anything serious yet. It seems to be heavier than some, lighter than others.
Yes, they have rear bumper kits.
don't see one on their web site?
Very nice. I like how tight it is to the body. Was aiming for something similar when trying to fab up my own.
It's been awhile since the bumper was installed, how is it holding up, anything you'd do differently?
- Thread starter
- #19
A few scratches on the paint, but otherwise it is great.
davidp14
SILVER Star
Thank you for the update. I've been eyeballing this setup. They actually have a deal when you buy both front and rear together. I may jump on it
