I posted either in this or the old board a chart for AU oil viscosity and temp for the 1FZ.
It was in C and I converted it to F.
Anyone have it handy?
It was in C and I converted it to F.
Anyone have it handy?
Non USA Oil Viscosity Chart
- Thread starter landtoy80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
I need to know the range of 15w40 oil.
What is the cold temp I can use 15w40 oil?
What is the cold temp I can use 15w40 oil?
warmer temps for the 15w40. I just put some in mine lastweek at an oil change. Should be good up til late fall around here.
I know this is not your chart, but hope this helps
https://forum.ih8mud.com/showpost.php?p=90624&postcount=3
https://forum.ih8mud.com/showpost.php?p=90624&postcount=3
Engine
Petrol(1FZ-FE) temperatures converted to Fahrenheit via TI-36x
20W/50 19.4 to 100.4
15W/40 9.5 to 100.4
10W/30 0.4 to 100.4
5W/30 -20.2 to 50
Petrol(1FZ-FE) temperatures converted to Fahrenheit via TI-36x
20W/50 19.4 to 100.4
15W/40 9.5 to 100.4
10W/30 0.4 to 100.4
5W/30 -20.2 to 50
landtoy80 u've got mail. 
Spin, That is handy, What market is it from?
RavenTai, It's from Australia. It's a scan from my owners manual
- Thread starter
- #9
Spin, looks great!
Ravin was asking is that for the 1FZ motor?
I see Landtank's version of warm is 10°f ☻
Ravin was asking is that for the 1FZ motor?
I see Landtank's version of warm is 10°f ☻
I'll double check, I don't actualy know any one with a petrol 80. every one I know has the TD.
Because of the time diffrence you all will be asleep while I'm doing this
Because of the time diffrence you all will be asleep while I'm doing this
landtoy80 said:
After a few phone calls today and a discussion with a mechanic friend.
It would be the same chart.
Although if your not in a rush I will keep searching for a 100 series manual to have a look see.
Ok i'm on holidays with nothing to do so I had a bit of a search.
does this look familiar.
Re: Synthetic Oil
--------------------------------------------------------------------------------
I got the AU viscosty from Andrew at 80school
1fzfe motor
20w50 oil- -7 deg to 38 plus 19 f to 100 f
15w40 oil -10 deg to 38 plus 14 f to 100 f
10w30 oil -18 to +38 deg 0 f to 100 f
5w30 -30 to 8 deg celcius -22 f to 46 f (WI weather)
all temps are in celcius
Andrew
conversions are from http://www.sciencemadesimple.net/cg...temperature.cgi
so if they are worng, don't kill the landtoy80
kurt
Sorry about posting the wrong chart. but look on the brite side you now have one for the 3F/3F-E Petrol
and 1HZ/1HDT and 1HD-FT Diesel.
sorry again
does this look familiar.
Re: Synthetic Oil
--------------------------------------------------------------------------------
I got the AU viscosty from Andrew at 80school
1fzfe motor
20w50 oil- -7 deg to 38 plus 19 f to 100 f
15w40 oil -10 deg to 38 plus 14 f to 100 f
10w30 oil -18 to +38 deg 0 f to 100 f
5w30 -30 to 8 deg celcius -22 f to 46 f (WI weather)
all temps are in celcius
Andrew
conversions are from http://www.sciencemadesimple.net/cg...temperature.cgi
so if they are worng, don't kill the landtoy80
kurt
Sorry about posting the wrong chart. but look on the brite side you now have one for the 3F/3F-E Petrol
and 1HZ/1HDT and 1HD-FT Diesel.
sorry again
- Thread starter
- #13
Spin, Y-sorry?
The temps vs Viscity looks about the same, doesn't it???????
Your chart is way-more-better
Spin, what is your MPG?
Do you have the link for that page?
The temps vs Viscity looks about the same, doesn't it???????
Your chart is way-more-better
Spin, what is your MPG?
Do you have the link for that page?
Here's the link to the page, your post is near the bottom.
https://forum.ih8mud.com/showthread.php?t=1560&page=2&pp=30&highlight=oil
I'm glad you like the chart, is there anything else I can help with?
I don't actualy record MPG it's just somthing that you've goto do to go any where (put fuel in). Roughly I usualy run the tank down to about the same place on the gauge before filling, it takes about 75 liters (19.81 gallons) from this normal dirving around town and on the highway I get about 580-650Km (360-404 Miles)
The great thing about the turbo diesel it doesn't change that much loaded or unloaded
From all the fuel I can carry in the main and sub tanks I can comfortably do 1000Km (621Mile) , this leaves around 20L (5Gallons) in the tank.
https://forum.ih8mud.com/showthread.php?t=1560&page=2&pp=30&highlight=oil
I'm glad you like the chart, is there anything else I can help with?
I don't actualy record MPG it's just somthing that you've goto do to go any where (put fuel in). Roughly I usualy run the tank down to about the same place on the gauge before filling, it takes about 75 liters (19.81 gallons) from this normal dirving around town and on the highway I get about 580-650Km (360-404 Miles)
The great thing about the turbo diesel it doesn't change that much loaded or unloaded
From all the fuel I can carry in the main and sub tanks I can comfortably do 1000Km (621Mile)
, this leaves around 20L (5Gallons) in the tank.
- Thread starter
- #16
<<<<I'm glad you like the chart, is there anything else I can help with?>>>>
Why yes, I want a HDJ80.
How much do they go for used? Do you deliver?
Why yes, I want a HDJ80.
How much do they go for used? Do you deliver?
landtoy80 said:
They are good I forgot there is usualy about 10L (2.6Gallon) left in the sub tank so that above is out of a total 145L (38.3Gallons) there is usualy about 7.6 Gallons left.
I would have to personaly deliver it
They go for anywhere from $18,000 to $30,000 for a showroom condition one.
Mine cost $25.000 four years ago.
- Thread starter
- #18
I was thinking like $8000 US.
I want one like mine, 255,000mi and well used
I want one like mine, 255,000mi and well used
landtoy80 said:I was thinking like $8000 US.
I want one like mine, 255,000mi and well used
And needing new Birfs
- Thread starter
- #20
landtank said:And needing new Birfs
NEWNEWERNEWFIELDS you mean ;p
