Nomad Convoy Rims FJ60 (1 Viewer)

[FJ40Rime]

Finally got around to my initial post, I went with the NOMAD 16X8 | 6X139.7 | -10 and 315/75/16 Toyo AT3:

 

[FJ40Rime]

I have 17x9. If I knew how they fit I would have ordered the with -10 offset so they would have stick out flush with the flares. I had to add 1.25" spacers to achieve it. Tires are 315/70/17.

View attachment 3590264

View attachment 3590265

View attachment 3590266

These look great!

 

[cruisercade]

Hi all, First post here on Mud but have been on the forum for a while always learning from everyone. Thought that this would be a good first post.
Got a new set of wheels and tires mounted on the 60 today. They are Nomad Convoy 501s in 15x7 -10. Tires are Kinda Klever in 33x10.5r15. I had been looking around a while for interesting options for wheels to replace the stock steels and I had narrowed it down to these and the SCS F5s, and decided to go with these. Very happy I did. Nomad designed this size specifically for the 40/60 series and they fit perfect. Beautiful fit and finish.
First impressions on the new kinda klever RT is very good as well. I had KO2s on before that had worn unevenly, cupped, were hard, and loud. I appreciate that kenda has come out with more uncommon sizes and given an alternative to BFG who pretty much monopolizes the 33x10.5s So far on my test drives around town with the kendas they are surprisingly quiet for such an aggressive trail tire. My BFGs were definitely old and hard, which likely made them even louder, but the kendas so far have impressed me, and I am also very happy with the look. We will find out soon how they perform off road, but others seem to think they do very well.
Just thought I would make a post highlighting this very new wheel and tire setup since I haven't seen it elsewhere on the forum and maybe help somebody else out there like me decide. View attachment 3297900View attachment 3297901

do you have any more pics of your setup? thinking about putting the same on my 85

 

[OnespeedTRD]

Where are ya'll finding these for the FJ80? I don't see anything on their website in 6x139.7 bolt pattern. Even did the configurator and it says no matches. Are they just out of stock?

 

[FJ40Rime]

Where are ya'll finding these for the FJ80? I don't see anything on their website in 6x139.7 bolt pattern. Even did the configurator and it says no matches. Are they just out of stock?

I ordered the 16X8 | 6X139.7 | -10 for my 80

 

[OnespeedTRD]

Weird. I just looked again and now I see them. I swear they didn't show up as an option about an hour ago... or maybe one too many White Claws while shopping. Thanks!

 

[FJ40Rime]

Weird. I just looked again and now I see them. I swear they didn't show up as an option about an hour ago... or maybe one too many White Claws while shopping. Thanks!

Np! I’m almost positive when I looked up the 80 on the configurator nothing came up as well, had to get the size from another Mud member!

 

[cruisinusa35976]

I have 17x9. If I knew how they fit I would have ordered the with -10 offset so they would have stick out flush with the flares. I had to add 1.25" spacers to achieve it. Tires are 315/70/17.

View attachment 3590264

View attachment 3590265

View attachment 3590266

How did you get the caps to fit? I just ordered these in a 16" and my caps are too small. thanks and looks sharp!

 

[Teddy]

How did you get the caps to fit? I just ordered these in a 16" and my caps are too small. thanks and looks sharp!

We've put several sets of these on at the shop. They sell deeper center caps that will fit. May have to call if you don't see them on their website.
Owner daily drives an FJ62 and will answer calls via his cell phone fairly often if he's not in. Very helpful and should be able to help any one with fitment questions.

 

[Perfectmax]

Just put a set on my 60, love ‘em.

 

[Isaactf2]

Thinking of picking up some Nomads for my FJ60. I have the Man a Fre/OME 4 inch lift and was hoping to take up some of that extra room with some bigger wheels/tires. Anyone out there have r16 or r17 Nomads on a 60 series?

Any advice on offset and back spacing for the bigger wheels?

Pic for attention, since I took the picture I replaced all the leaf springs and shocks and she's sitting a little higher than she used to.

 

[jembourbe]

So you guys are putting aluminum rims that kinda sorta look almost as good as steel rims on your trucks these days? Spillover from the lifted Cayenne crowd? I don't get it.