NEW 4x4 Labs group buy!!! - 12-03-15

[socallove]

Group Buy: 12-03-2015

Luke is down for another group buy, as of now, he is generous enough to offer 15% off kits and 10% off fully built bumpers.
- Kits are in stock and ready to ship asap.
- Built bumpers will go out in January, it's holiday season, expect some delay.

Participants will email Luke@4x4labs.com what you want to order and you pay him directly.


Luke's paypal is Luke@4x4labs.com



Name:
phone:
email:
Full Address: if shipping is required - indicate local pick up
Front/rear bumper:
Welded/Kit:
Powder coat/Raw: (save $100 on welded bumpers if left raw)
basic rear bumper:
single swing out:
Dual Swing out:
Tire carrier:
gas can basket/cooler basket/Fridge Basket:
Ladder:


4×4 Labs

More details on the front bumper: Jose's thread
Front bumper facelift: AOE to 4x4Labs

Pricing and parts list for 80 and 100 series bumpers and bumper kits

(40, 55, 60 series bumpers are identical price although some parts in the list below may be different)

Basic bumper- kit $495 Welded and finished $895
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver

Single swing out bumper- kit $895 Welded and finished $1375
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
1 large spindle assembly
1 swing arm assembly with 4 sleeves
Latch and latch plate
1 gas strut with ball stud
2 stoppers

Double swing out bumper- kit $995 Welded and finished $1495
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
2 large spindle assemblies
2 swing arm assemblies with sleeves
Latch and latch plate
2 gas struts with ball studs
3 stoppers

Attachments

Tire holder- kit $125 Welded and finished $225
Swing out clamp bracket
Main upright
2 gussets
Side clamps
Top cap
3 hole tire holder
Square tube receiver
3 wheel studs
3 lug nuts
Hardware

One, two or three gas can- kit $195 Welded and finished $395
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Ladder #1 – kit $150 Welded and finished $350
Swing out clamp bracket
2 Base tubes
2 rungs
Hi-lift bracket with standoff

Ladder #2- kit $175 Welded and finished $375
The first rung on this ladder is sleeved for a third accessory.
Swing out clamp bracket
Main hoop
1 round rung
1 square sleeved rung
Hi-lift bracket with standoff

Cooler basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops your supplied dimensions
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

ARB fridge basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Bicycle rack, 2 bikes- kit $195 Welded and finished $295
Swing out clamp bracket
Main upright
2 base gussets
Rear tire plates
Rear tire plate cross member
Rear tire hold down straps
2 skewer tubes
2 skewers
Safety hook
Top cap
Logo plate

Separate bumper parts

Main Shell- Formed and plasma cut bumper shells for FJ80 and FJ60 $185
Uncut formed main shells 72″ wide- $125
Formed laser cut side skid plates- $125 ea
HD Spindle assemblies- $95 ea.
Swing out assemblies- HD spindle assembly, sleeved swing arm with gas
Gas shock, ball studs and stops – $225 ea.
Accessory bracket clamp- $25
Towing receiver- $25
Recovery points- $30 ea.
Hi-lift bracket- $25
License plate bracket- $10
De-sta-co 4000 lb. Latch and latch plate- $95
Gas struts 120 lb. $25 ea.
Ball studs $2.50
6″ or 8″ Gusset $9
Accessory carrier retrofit sleeve/clamp kit- $29

 

[sactoshooter]

Sorry for not giving you my info. I live in Sacramento and would make the trip up to 4x4labs to pick up the bumper. I am looking to purchase the diy kit

 

[socallove]

I figured so

 

[Stylo07]

Sorry if I missed it, but is there a price for the front bumper? I still haven't found it here or on his site. Thanks for your help.

 

[vapilotda]

i'm down for a rear with just about everything (dual swingouts)...watching till it gets to the discount!

 

[socallove]

Front bumper DIY kit is $600, roughly $500 discounted.

 

[BBP1961]

Is the Diy kit the exact bumper in the second photo?

 

[socallove]

Is the Diy kit the exact bumper in the second photo?

No, that bumper was slightly altered by the owner.

 

[axolotl81]

I am not a welder nor do I own one, so....I would like to take a completed front bumper. I'm located in Elk Grove and willing to pick up also. Thanks. Are the rear bumpers for sale also completed? If so, how much?

Heck...If none of them come complete, I'm sure I can find a welder.

 

[socallove]

I am not a welder nor do I own one, so....I would like to take a completed front bumper. I'm located in Elk Grove and willing to pick up also. Thanks. Are the rear bumpers for sale also completed? If so, how much?

Heck...If none of them come complete, I'm sure I can find a welder.

It's ALL on sale!!!! just tell me what you need. They can be purchased complete, but of course cost more. The rear bumper completed is roughly $2200 retail price minus the discount, prices are on his website.
@4x4labs

 

[jp_waltz]

It's ALL on sale!!!! just tell me what you need. They can be purchased complete, but of course cost more.

Socal...do you know how much a completed rear bumper with duel swingouts might run? I'll look around for pricing info on the site as well
Thanks
Paul

 

[socallove]

Socal...do you know how much a completed rear bumper with duel swingouts might run? I'll look around for pricing info on the site as well
Thanks
Paul

Hi Paul, Roughly $2200 before discount for rear bumper with swing outs!

 

[axolotl81]

Cool, complete front for sure. Let me se if the wife will let me have a very early bday present.

 

[socallove]

Damn our wives!!!

 

[axolotl81]

 

[Stylo07]

No, that bumper was slightly altered by the owner.

I believe this is what the front bumper looks like unmodified and before paint:

How much is a front bumper completely welded? And completely welded with powder coating?

 

[Bax454]

Name: Tyler (Bax454)
Front bumper: NO
Rear bumper: Basic Rear DIY kit
Zip code/state/city: 97338/Oregon/Dallas

I am committed, yet I would like to talk with Luke again about the swing out holes as I already have a 4x4Labs spare swingout.

Potentially I have two other buyers (rear kits), but I need to talk them into it first and get a quote for discount possibility and shipping total.

-Thanks for organizing this @socallove

 

[socallove]

I believe this is what the front bumper looks like unmodified and before paint:View attachment 1012681
How much is a front bumper completely welded? And completely welded with powder coating?

Thanks for posting that picture, it's about $1000 for a complete front bumper minus discount.

Name: Tyler (Bax454)
Front bumper: NO
Rear bumper: Basic Rear DIY kit
Zip code/state/city: 97338/Oregon/Dallas

I am committed, yet I would like to talk with Luke again about the swing out holes as I already have a 4x4Labs spare swingout.

Potentially I have two other buyers (rear kits), but I need to talk them into it first and get a quote for discount possibility and shipping total.

-Thanks for organizing this @socallove

You are welcome and thanks for joining us Bax454, glad to have you on board, hope your friends will join up as well.

 

[Blade 80LC]

This link http://www.4x4labs.com/products/rear-bumpers/ has prices for rear kits and completed bumper options. I'm not sure if the front bumper kit is supposed to come out like the prototype or has been modified at all. Jose's version also looks sharp. I couldn't find the price (or pictures) for the front bumper on the 4x4 Labs site, so seeing in this thread that it's only $600 (less group buy discount) was useful. Are there more pictures of the bumper, that show the version that is currently for sale?

 

[socallove]