4x4 Labs rear storage and 3rd row seat bracket (5 Viewers)

[Herrett]

Here’s a stupid question but my searches haven’t yielded an answer. I have a 4x4 Labs rear storage basket arriving next week and looking at the rear seat bracket, I can’t figure out how to pop the plastic bolt cover off. Do I just pry it off and don’t worry about damaging the plastic cover or is there a trick to removing it.

Thanks

Robert

 

[NeverFinis]

The hex shaped cover on the front bracket? You just pry it off.

 

[Herrett]

I’m not with the 80 right now but I thought it was a square plastic piece covering the front bolts on the rear seat bracket. Do you just pry it off?

 

[NeverFinis]

This? You pry it off

 

[Herrett]

This plastic cover.

 

[NeverFinis]

I don't remember how that one comes off, but most just clip on. My guess is that you spread the bottom, and pull towards the back.

 

[Herrett]

Thanks. Once the monsoon of the day passes, I’ll try that

 

[jbee]

They pop off, but they’re very tight.

 

[Herrett]

Thanks