Need part numbers. 1991 3FE

[Izeloz]

I need the parts labeled #13 and #75 in this picture. Anybody have any idea on Toyota part #'s for these? Thanks.

 

[Barnstormer]

Unless you are really trying to stay 100% original, you can do without that tensioner thing on the bolt. You can just do the old-school tension it with a lever technique to tension the belt, and snug it down.

 

[Izeloz]

That's how I have been doing it. I just like the doubled up nature of two pieces of hardware to hold the tension rather than one lonely bolt.

 

[Alleycats]

Pretty sure those parts (13 & 75) are no longer available, good news is you can tension the old school way like said above.

 

[Izeloz]

I will eventually fabricate something, I guess. Just a little block of metal with one threaded hole and one unthreaded hole would do it. A bolt will be easy to find. In the mean time, old school it is. Thanks.

 

[Golgo13]

Check with @beno or @cruiserdan
If they can't get those parts, try @arcteryx (Jason at Cruiseryard)

 

[Golgo13]

You could also fab them yourself from a couple nuts and some threaded rod

 

[OGBeno]

#13 is discontinued.

The long bolt is available: 90119-08626