Need help identifying these parts (1 Viewer)

[Joe Link]

I've purchased so many parts this past year I'm having trouble keeping them straight. These came in various lots I've purchased from other members (no idea if they're OEM or not). Any help identifying them would be appreciated (bonus for OEM part numbers as well)!

 

[Wyatt Pine]

1. Valve Stem Seals (90913-02096)
2. PCV valve(12204-35040) and Grommet (90480-18001)
3. U-joint C Clip ( I think)
4. Fuel Injector grommet (90480-13005) or insulator (23291-41010)
5. Fuel Filter Banjo Bolt Washers (90430-12026)
6. Injector O Rings (90301-07001)
7. PAIR Gasket
8. Water Outlet Gasket 16341-66020
9. Water Bypass Outlet O Rings (90301-29006)
10. EGR Gasket
11. Timing Chain Tensioner gasket (13552-66010)

 

[mdawg]

Taking a stab:

1. Intake and/or exhaust valve stem seals
2. PCV valve and grommet
3. ?
4. ?
5. Washers for fuel filter? Or, maybe banjo bolt washer for brake calipers?
6. ?
7. ?
8. ?
9. Distributor O-ring
10. Gasket above thermostat housing?
11. ?

 

[fz1boxer]

7 looks like the PAIR gasket 8 looks like the water outlet gasket that comes off the head

 

[bigredmachine]

1. valve stem seals (exhaust I think)
2. pcv vlave and grommet
3. u-joint c-clips (front and rear are different sizes)
4. injector cushions (injector to head)
5. banjo bolt gaskets (guessing calipers due to size)
6. injector O-rings (injector to fuel rail)
7. gasket ( no clue probably not even from an 80 )
8. gasket (maybe iac)
9. o-ring (maybe dist o-ring)
10. o2 sensor gasket or egr
11. timing chain tensioner (total shot in the dark)

for p/n you should ask @Beno or @cruiserdan, they know all numbers for everything

 

[cruiserdan]

Pretty much looks like stuff I no longer care about....

1, valve seals
2, PCV valve & grommet
3, U-joint snap rings, odd you'd have those loose.
4, injector insulators
5, fuel filter banjo gaskets
6, injector O-rings
7, Gasket, PAIR pipe to PAIR valve (93-94 only)
8, Upper water outlet-to-head gasket
9, Water bypass pipe O-rings
10, EGR pipe-to-Cylinder head
11, Timing chain tensioner-to-head

 

[Joe Link]

Man, you guys are amazing! Thanks for the help.

It's probably impossible to tell from the photo, but can you tell if any are (or definitely aren't) OEM?

And @cruiserdan it's funny you mention those U-joint rings, I have the u-joints also but had no idea those went with them

 

[OGBeno]

Pretty much looks like stuff I no longer care about....

1, valve seals
2, PCV valve & grommet
3, U-joint snap rings, odd you'd have those loose.
4, injector insulators
5, fuel filter banjo gaskets
6, injector O-rings
7, Gasket, PAIR pipe to PAIR valve (93-94 only)
8, Upper water outlet-to-head gasket
9, Water bypass pipe O-rings
10, EGR pipe-to-Cylinder head
11, Timing chain tensioner-to-head

#10 is correct shape-wise. But this kit is not an OEM -66036 kit. It’s some aftermarket brand. The gasket composites are not OEM.

25628-66010 is a metal gasket in OEM form. Not a composite gasket as shown in the picture.

Then again, who cares I guess at this point. I know besides @cruiserdan and myself no one gives a **** anymore.

EDIT: #7 is not OEM either. That should be a MLS steel gasket.

 

[Joe Link]

Wow, both of the gurus in my thread! I’m honored

 

[LandLocked93]

#7 and #10 are clearly Wits End key fobs.
(not really)