more ARB bumper questions (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

>> deep fording? <<

What is that? The deepest river we have in the whole state is the Rio Grande and you can walk across it most of the year... make that *all* year.

-B-
 
I be a desert dweller -H-, :rolleyes: They are for hot weather towing. When ya wanna "button up" the lenses go back on. ;)
 
Quality seems fine.. not much difference from the stock ones I took out, same goes for the corners too. I like them, but the upgrade is entirely cosmetic, so it's all about personal preference. Let me know if you need another picture.
 
[quote author=nakman link=board=2;threadid=5547;start=msg45252#msg45252 date=1064610405]
Quality seems fine.. not much difference from the stock ones I took out, same goes for the corners too. I like them, but the upgrade is entirely cosmetic, so it's all about personal preference. Let me know if you need another picture.
[/quote]

I like! Me wants :D

Where did you get the clear running lights?
 
The non US clear marker lenses are not discontinued. I can get them easily. They are a direct match to the chrome trim on 91-94 models. They also fit 95+ the edge trim is a bit different on 95+ but hard to see. They list for $43.82 each. ;)


IIRC, the Lexus lens is a clear/orange combination.
 
About the wife thing. not to brag or anything, but mine bought the bumper for me for Xmas and then 4 months later bought the M12000 for my Bday :D :D :D. She thinks the 80 is the best. Hmmm did she get them for me or the 80 ???.
Cheers,
Sean
 
[quote author=Beowulf link=board=2;threadid=5547;start=msg45249#msg45249 date=1064609959]
>> deep fording? <<

What is that? The deepest river we have in the whole state is the Rio Grande and you can walk across it most of the year... make that *all* year.

-B-

[/quote]

I need to dig out some pictures of an old Jeep of mine with water up to the doors on a trail by that very river up by Tesuque Pueblo...

Did you ever see the old REI parking lot in Albuquerque when it rained? :eek:

-H-
 
[quote author=MTNRAT link=board=2;threadid=5547;start=msg45286#msg45286 date=1064614994]
About the wife thing. not to brag or anything, but mine bought the bumper for me for Xmas and then 4 months later bought the M12000 for my Bday :D :D :D. She thinks the 80 is the best. Hmmm did she get them for me or the 80 ???.
Cheers,
Sean
[/quote]

That's funny Sean. My wife doesn't like the fact that I spent so much on the bumper but she loves it. Keeps bugging me to lift it up. Now, she wants me to sell her car (which we never drive) and get another 80 series. Twist my arm honey...me reluctantly "I guess so". 4 Cruisers...sure honey no problem :D

My plan of converting her from a "Car person" to a "Cruiser chick" is working beautifully. (evil grin) 8)
 
Another 80 :D Beautiful!!! :cheers:
Sean
 
I FINALLY got my replacement ARB indicator amber lens's.

[glow=red,2,300]Nakman[/glow]
I wired them up per your instructions..they worked PERFECT! :D and you are right the 'disco' turn signals look pretty wild :D Thanks :D

[glow=red,2,300]Koffer (or anyone else)[/glow]
I took the #1156 out so my lens wouldnt melt...BUT, i couldnt get my hands on a #67 :( Instead..i put in a #89 "Dome/Courtesy" 12v bulb. Will that be ok? ???

I do have a spare set of
"#97 - License/Park 12v" & " #63 - License/PArk 6v"

Am i ok w/the #89..or should i swap it for one of my spare sets above??..or hunt down a #67?
I just dont want my lens's to melt..

thanks,
joe
 
Koffer (or anyone else)
I took the #1156 out so my lens wouldnt melt...BUT, i couldnt get my hands on a #67 Instead..i put in a #89 "Dome/Courtesy" 12v bulb. Will that be ok?

Should be just fine I think I used the #89s the last time in the 60 now That I think back
I have enough of a hard time remembering :rolleyes:which bulbs I have go to which car Im working on
The 65 VW is 6 volt the BJ70 is 24 volt I have all those 12v cars and trucks I tossed in there too :D
 
Hey guys,

I'll be installing the ARB bumper this week. I'm curious as to why you are reinstalling the two hooks? It seems to protrude down quite low and the bumper already has shackle eyes. Just curious.

Ali
 
Well, first off I think the ARB is beefy as hell, but I do have doubts about the strength of those shackle eyes holding up to pulling from the side. The factory loops bolted right to the frame seem a more solid approach, IMO, I'd be devestated if my ARB were to get bent.

And I know they're low, but if I slam into a rock that's high enough to hit the tow hook, I've got bigger problems than a scratched hook. it's still about a foot higher than the bottom of the front diff, so anything that big I'll put under the tire, and not try to clear.. but my 80 is a daily driver, not a rock crawler, so I'm not that aggressive. heck I still have the running boards on (not for too much longer tho!)
 
I agree with you on the side pull thing. My ARB shackle eyes were bent from side pull too. I got tired of them hitting rocks, so I cut/grind/paint them off and installed new shackle brackets on the front of teh bumper. This is on a RR. The shackle eyes on the FJ sit much higher than the RR bumper.
 

Users who are viewing this thread

Back
Top Bottom