Misc F & 2F parts (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

pappy

photosynthesizing
Moderator
Joined
Oct 7, 2003
Threads
396
Messages
12,412
Location
Too far north. Too far east.
Location
United States
I have the following parts:

From 1969:
3-speed flywheel, $40
3-speed bellhousing (missing lower cover), $35
3-speed clutch fork, $10

From 1978 2F:
Top water neck (thermostat housing), $10 [SOLD]
Water pump/fan pulley, double, $25 [SOLD]
Fan, $10
Fan clutch, $15

Pics available on request. Shipping by FedEx Ground from 87120, Albuquerque, NM. PM or email to ratstew@comcast.net
 
I'm interested in the thermo housing and the fan pulley. I'll contact you direct.

Thanks.
Todd Bull.
 
Will the fan clutch bolt up to a 1F water pump? I've just complete a P/S conversion, had to add a double fan pulley now the fan won't bolt up with out a spacer. i'm thinking a fan clutch will move it out several inches.
 
Don't know. Is there a measurement I can take?
 
At the end of the pump housing there is a 4 bolt pattern with a center line deminsion of 1.5". The over all projection needs to be less than 3" from the pulley out towards the radiator. There is also a 1" od projection in the center of the pump that the original fan was centered on that the fan clutch will need to go over.
 
I sent you a PM.
 
Top
 

Users who are viewing this thread

Back
Top Bottom