Wanted Mid-1979 FJ40 Emissions Equipment

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 6, 2017
Threads
12
Messages
63
Location
Denver, CO
Vehicle Model
  1. 40 Series
Location
Denver, Colorado United States
I recently purchased a mid-1979 FJ40 that's been partially de-smogged (looks like it still has charcoal and EGR). I live outside Denver, CO, so I need to get the emissions squared away. Looking for air pump, rail, hoses, etc.

Edit: It does not have stock power steering.
 
Last edited:
do you have stock power steering?
 
reason I asked was the stock air pump is smaller in 1979 and 1980 starting in 1981 it is the same thru 1987
you should be able to fit a later air pump which should be easier to source than the 79-80 model
 
reason I asked was the stock air pump is smaller in 1979 and 1980 starting in 1981 it is the same thru 1987
you should be able to fit a later air pump which should be easier to source than the 79-80 model
Ah, that’s good to know. So the air pump on the 79-80 should be the same size as the 81-87? Also, are you saying that it could be pulled from a 60 series 2F (including up to the “87”)?
 
I'm about to have everything off a 78 in a little bit
 
So the air pump on the 79-80 should be the same size as the 81-87? Also, are you saying that it could be pulled from a 60 series 2F (including up to the “87”)?

no, the 2 year 1979 and 1980 air pump has a smaller body,
the 1981-1987 has a larger body and will not interchange with the larger body

this is only relevant if you are replacing a current air pump or you have OEM power steering

starting from scratch without OEM power steering, you should be able to source the entire later setup, and not have fit issues
the later 1981-1987 had a longer run and is more available than the small 2 year run of pumps

or Matt can set you up with an earlier 1978 setup
 
I would think the 81-87 setup would be the better way to go for him?
 
I should have most of what you need. I’m already desmogged and have the removed components in storage. I’m getting ready to do an engine swap so can remove whatever’s left. My air pump is removed but gutted so can’t help with that component. I’m in north metro area.
 

Users who are viewing this thread

Back
Top Bottom