Measurement question

Discussion in '100-Series Cruisers' started by rockcrawlingyota, Jun 13, 2018.

  1. rockcrawlingyota

    rockcrawlingyota

    Messages:
    77
    Likes Received:
    16
    Joined:
    Mar 8, 2016
    Location:
    birmingham
    So i got my block machined the other day and he said they removed 10 11 thousandths and i have no idea how to write that in decimal form.. im a rookie at all this so could i get some help?
     
  2. Mike6158

    Mike6158 Random Pixel Generator SILVER Star

    Messages:
    756
    Likes Received:
    258
    Joined:
    Jun 1, 2014
    Location:
    Weimar, TX
    0.010" to 0.011"

    zero dot 10ths, hundredths, thousands, and if you're real good, ten thousandths of an inch
     
  3. rockcrawlingyota

    rockcrawlingyota

    Messages:
    77
    Likes Received:
    16
    Joined:
    Mar 8, 2016
    Location:
    birmingham
    Thank you! I couldnt figure it out no matter how hard i tried
     
  4. Somebodyelse5

    Somebodyelse5

    Messages:
    1,127
    Media:
    4
    Likes Received:
    927
    Joined:
    Feb 9, 2014
    Location:
    Arizona
    You'll hear machinst folk talk about "tenths"... referring to tenths of thousands (.0001 = 1 tenth), not tenths of an inch (.1 = 1 tenth) worth knowing.
     
    rockcrawlingyota and UltraFJ40 like this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.