ARCHIVE Locker button build part 1

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2012
Threads
190
Messages
162
Location
Seattle, WA
Website
www.mofaraz.com
For anyone interested in viewing a locker button build using decals on 3D printed buttons please see below:

I produce many decal kits for 40 series and decided to install the F/R + Air compressor kits in 2 different styles. You can see the progress and final results....just waiting to be installed on a lucky cruiser and I will be sharing them on my Advent page.

The steps are simple -- prepare button and install decal.....I chose to apply 3 coats of UV clear + another 3 coats of spray clear for a total of 6 layers. The finishing piece is a brass set-screw which is (German) made and makes a complement to the solid feeling knob which is also UV rated resin.

Pictures below (brief but clear)

- Mo

IMG_4402.jpg
IMG_4404.jpg
IMG_4428.jpg
IMG_4425.jpg
IMG_4480.jpg
 

Users who are viewing this thread

Back
Top Bottom