- Thread starter
- #41
Two of the four seat 'pads' showed some pitting .. so I used some 16 gauge to replace those .. again, underside won't get any grinding or very little .. inside the cabin a little more ..
just another 60 series with an 80 series frame .. (1 Viewer)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Two of the four seat 'pads' showed some pitting .. so I used some 16 gauge to replace those .. again, underside won't get any grinding or very little .. inside the cabin a little more ..
- Thread starter
- #42
Then it was on to the passenger side floor pan .. marks a bit of a milestone for me as I started in the driverside floor pan almost 3 years ago .. although the project requires years more of work and ($) it feels good to come full circle .. little wins, right gents?
- Thread starter
- #43
Last but not least I replaced a thinning section of the foot well and in the midst of that project I had to get back to work .. more updates in about 6 weeks .. cheers
