Parting Out Jemez Springs, NM: FJ 60, wheels, interior, 2f

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Door cards still available?
 
Is the complete 60 wire harness, fuse panel, and all relays, etc still available? If it looks all stock and pliable I am interested. Pls PM me.
 
I’m in ABQ, but I won’t finish my fire season until the end of September. I’d love to come up after that and grab some parts. Bummed I missed the h55 for sure.
 
Hello there,

I was wondering if you might still have the 2F head on the 1981 FJ60 you were parting out? My casting broke at one of the end exhaust manifold bolt holes, so I need a replacement head. Casting number I am looking for is 61040. Thank you and thank you for the parts you previously sold me. I hope to put the truck all together soon.
 
Smokejumper85 said:
Just finished a project and not ready for another. I have a 81 Fj 60 that is covered in rust but have a lot of parts from it. A complete motor, an H55f 5 speed trans, and many more parts. I would like to sell as a whole to someone that needs a parts car $2500. Or can spend time parting it out and sell parts 1/2 of what’s posted on Cruiser Corps used section.

View attachment 2685489

View attachment 2685490

View attachment 2685491

View attachment 2685494

View attachment 2685496

View attachment 2685498

View attachment 2685500

View attachment 2685502

View attachment 2685506

View attachment 2685507
Click to expand...
I need 2 small pieces of the carb throttle linkage. These are small pieces but I cant finish my FJ60 without them so if you would take the time to pull these and ship them I would GREATLY APPRECIATE IT! See attached diagram showing pieces I need.
Smokejumper85 said:
More pics,

View attachment 2685514

View attachment 2685515

View attachment 2685516

View attachment 2685517

View attachment 2685518

View attachment 2685519

View attachment 2685520

View attachment 2685521

View attachment 2685522

View attachment 2685523
Click to expand...
Can I get these 2 carb linkage parts please?

Toyota Carb Likage.webp


Toyota FJ60 linkage.webp
 
 
CKohlhoss said:
I need 2 small pieces of the carb throttle linkage. These are small pieces but I cant finish my FJ60 without them so if you would take the time to pull these and ship them I would GREATLY APPRECIATE IT! See attached diagram showing pieces I need.

Can I get these 2 carb linkage parts please?

View attachment 3227600

View attachment 3227601
Click to expand...


vintageteqparts.com

#78103 NEW / NOS OEM TOYOTA ROD , ACCELERATOR Linkage Carburetor torque rod to carb itself short one 72-87 FJ40 FJ60 FJ55 FJ45 FJ60 HJ60 78103-90A00 / 78016-90352 / 78016-90351 - VintageTEqParts.com

NEW / NOS OEM TOYOTA ROD , ACCELERATOR Linkage Carburetor torque rod to carb itself short one 72-87 FJ40 FJ60...
vintageteqparts.com


vintageteqparts.com

NEW ( Orange ) BOOT, ACCELERATOR CONNECTING ROD 10/72-1987 FJ40 FJ60 FJ55 FJ45 HJ60 HJ45 78199-90352 / 78199-90353 - VintageTEqParts.com

( Orange) BOOT, ACCELERATOR CONNECTING ROD Sub Assy, Gas Peddle Orange Rubber Boot old part # 78199-90352 - NEW...
vintageteqparts.com


DSCN2481_2048x.jpg

d_39834-Copy_2048x.jpg


DSCN8889_e05d3c92-c2e3-43c0-a141-9ab34f2f5266_2048x.jpg

1674506831337.webp

1674506969180.webp
1674506936039.webp

C42AE560-161D-4AAA-9017-86F91F748F2A_2048x.jpg


1.12.webp
1.20.webp
1.24.webp
1.webp


1.14.webp
 
NOTE : make sure you un-click the the MUTE icon tab as soon as you enter the link below , the crank up the volume and witness FJ60 Accelerator Linkage Shangri-La BLISS ...:popcorn:
.
.

 
Smokejumper85 said:
Just finished a project and not ready for another. I have a 81 Fj 60 that is covered in rust but have a lot of parts from it. A complete motor, an H55f 5 speed trans, and many more parts. I would like to sell as a whole to someone that needs a parts car $2500. Or can spend time parting it out and sell parts 1/2 of what’s posted on Cruiser Corps used section.

View attachment 2685489

View attachment 2685490

View attachment 2685491

View attachment 2685494

View attachment 2685496

View attachment 2685498

View attachment 2685500

View attachment 2685502

View attachment 2685506

View attachment 2685507
Click to expand...
Smokejumper85 said:
More pics,

View attachment 2685514

View attachment 2685515

View attachment 2685516

View attachment 2685517

View attachment 2685518

View attachment 2685519

View attachment 2685520

View attachment 2685521

View attachment 2685522

View attachment 2685523
Click to expand...
Hey do you still have the dash and how much are you asking for it?
 
Hi there,

Hopefully I haven't jumped in too late on this. I'm interested in any or all of the following:

- Any/all of the door cards
- Drivers side 'b'? pillar cover (if brown)
- Radio (I guess I'm 3rd or 4th in line of interest)
- Driver's window regulator
- Interior door handles (if brown)
- Bench seat (maybe). Mine's okay... may just need cleaning.
- Cigarette lighter
- Ash tray and the mounts
- Probably a few more things..

My rig is a 1987, but I've found the 60/62 to have a LOT of cross-year compatibility. Your 1981 looked super straight and clean, save for the exterior rust on the doors... A good body shop could have handled that, but I also completely get not wanting to deal with a project. LOL...

I'm planning to be @ Overland Expo in AZ. I can easily swing by your place to pick up parts on my way back to CA... save you a trip and packaging.

Also, your inbox is full.... Tried to DM you.


Thanks....
 
You must log in or register to reply here.

Share this page

Back
Top Bottom