Is anybody still interested in a center console? (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

jjdeneen918 said:
Do you intend to offer them to color match grey & tan interiors?
Click to expand...
yes, to an extent. I am guessing we will not be getting anywhere near an "exact match" situation, but in the ballpark is expected. likely scenario is we will stock black and offer custom colors with additional lead time. still have to get that part figured out, but there are plenty of folks who want black so first run is that to get them in people hands.
 
Delta VS said:
We've been working on one for a bit now, incorporating into our Cummins 2.8L FJ80 swap along with a bunch of other parts that you'll be asked for feedback on in the near future.

Most of our designs start in the virtual environment. We recently purchased a 3D scanner to help speed that process up.

View attachment 1687556

Once we get all the essential geometry into the computer, we can use it to come up with the first approximations. Contrary to popular belief, 3D scanning is not quite a "blow and go" operation yet. There is either a lot time spent post processing, or a lot of money spent on software (and by a lot, think $20,000). Since we like to keep both of those categories as light as possible, we still use tape measure and calipers to verify basic scan info.

Once we consolidate this info, we start modeling what a product will actually look like and how it will function. We also verify fitment in the vehicle with basic scan data.

View attachment 1687557

A lot of our prototyping work happens in house, but for finer detailed things that involved a lot of precise sheetmetal, we do contract outside laser cutting and CNC press brake work.

View attachment 1687549

This particular design utilizes both mechanical fastening (through multiple pieces of sheetmetal) and welding in key areas for strength. The threaded mechanical fasteners double as mount points for future accessories, the layout of which will be published so folks can even make their own accessories (so you can have a two-bottle holder OR a single Thirsty-two ouncer holder). A mount plate inside will also be used so things like holsters can be attached. This is one of the big areas where feedback is actively sought.

View attachment 1687550

As you can see, the back side of the console has an easily adapted layout of threaded inserts as well. Each unit will come with a printed out sheet of both the front layout and rear layout, and we will have a pdf on our website when the time comes for that.

The prototype unit in these pictures has been installed in @swankstar's rig for fitment and drive testings. While he may be a short little troll type, the height has been verified by multiple drivers as being nice when on the road. It is quite cavernous inside, with lots of space to add shelves and cubbies.

If you've got any questions, ask away!
Click to expand...
I’m in
 
Bummer, my interior is tan. Let us know when you make a tan one.
 
So this is kinda handy...

32CA6856-E674-4567-80CA-67476B88D0AA.jpeg
 
You must log in or register to reply here.

Similar threads

danny93kor
Center console fridge(HDJ) in USA 80 series
Replies
7
Views
2K
logicbyondreaso
logicbyondreaso
Alexbv
Center console ham radio speaker on the LX
Replies
2
Views
721
greentruck
greentruck
vegas
Anybody seen this?
Replies
5
Views
477
robnicko
R
obe12
Center Differential Lock
Replies
8
Views
523
obe12
obe12

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom