Inner fender mudguard??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ATL Cruiser

GOLD Star
Joined
Aug 1, 2022
Threads
52
Messages
656
Location
Atlanta, GA
Could anyone tell me the part number to this? It's the rear, inner fender mudguard. My LH side is missing.



1665659913163.png


1665659967667.png


I worked with Stedman on it over in Japan. We thought we had it, but it turned out that it was only sheet metal, not the plastic guard...

1665659859035.png


1665660062154.png
 
Mine still has that part, I can check if there is a part number printed on it.
 
I took a look and thought I had one there but that hole is actually used to secure the mud flap.

556ED35A-E8F5-43B6-9B18-6955BF2B952F.jpeg
 
The right hand side which is p/n 77277-90K01 is indeed to protect the fuel lines and such.
 
Last edited:
I believe that’s correct. Mine has the same as well.

Absolutely correct. Shielding the fuel fill tube. Left side-only.
 
Many thanks to everyone on this thread. That makes perfect sense. Now I just need to track down a mud guard bracket.
76646-90K01.

It is difficult to tell from your photo but your right side bracket may also be missing.
 
76646-90K01.

It is difficult to tell from your photo but your right side bracket may also be missing.
Thank you. Got both sides on the way. I'll install it while painting those janky fender wells.
 

Users who are viewing this thread

Back
Top Bottom