Ptr29-60097
The fricking software will not permit 3 capital letters in a row...
P T R
Dan, just left you a voicemail...don't have my credit card with me at the office today so maybe I should just ring you tomorrow but I want one.
info on new FZJ80 SUPERCHARGERS finally
- Thread starter wakesetter
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Dan, just left you a voicemail...don't have my credit card with me at the office today so maybe I should just ring you tomorrow but I want one.
Teaser pictures, and helps Dan sell a few more. 
Last edited:
fzjconvert
one hand, two ducks
07-28-08, 02:41 PM #82
SBFJ60FIG
IH8MUD Rookie
Join Date: Jan 2006
Location: Chicago!
Posts: 73 Anything yet on a release date???
I picked up my LX450 and I'm quite excited to begin force-feeding it!!!!
C-Dan, where did you pick up your 3/4 breaker bar? I got one at Sears for my early cruiser's crank pulley bolt but it's way too short to make it to the frame rail and don't feel like flagging down the Snap-On man!?
BTW
NOTE:
this is a potentially dangerous method and it's possible to break things and/or people in the process. DO NOT attempt it unless you are certain about what you are doing and do so ENTIRELY AT YOUR OWN RISK (borrowed from CDAN)
NOTE:
this is a potentially dangerous method and it's possible to break things and/or people in the process. DO NOT attempt it unless you are certain about what you are doing and do so ENTIRELY AT YOUR OWN RISK ( borrowed from CDAN)
LOL
SBFJ60FIG
IH8MUD Rookie
Join Date: Jan 2006
Location: Chicago!
Posts: 73 Anything yet on a release date???
I picked up my LX450 and I'm quite excited to begin force-feeding it!!!!
C-Dan, where did you pick up your 3/4 breaker bar? I got one at Sears for my early cruiser's crank pulley bolt but it's way too short to make it to the frame rail and don't feel like flagging down the Snap-On man!?
BTW
NOTE:
this is a potentially dangerous method and it's possible to break things and/or people in the process. DO NOT attempt it unless you are certain about what you are doing and do so ENTIRELY AT YOUR OWN RISK (borrowed from CDAN)
That's called a "cheater" by the way.
It does add a degree of "not quite right" to something that is already "not quite right"....
If one chooses to add a cheater to an already potentially dangerous tactic, please do excercise extreme caution.
NOTE:
this is a potentially dangerous method and it's possible to break things and/or people in the process. DO NOT attempt it unless you are certain about what you are doing and do so ENTIRELY AT YOUR OWN RISK ( borrowed from CDAN)
LOL
Last edited:
I have been following this thread and I am under the impression that this a limited run and these will probably not be available in 4 or 5 years. If so, it looks like I need to somehow bump up my student loan amount to the tune of $3300.00. I'll already have over $220,000 in student loans 3 years from now whats another 3K on the top?
Professional student?
Professional student?
Basically. Keep laughing Dan, you have already received more of my student loan fund than I dare tell the
. If I am crazy enough and or grow a pair big enough you might be seeing another 3K of it for one of these puppies. 
Your secret is safe with me.....
Damn.
Ting deleted his post. I knew I should have quoted him.........
Ting deleted his post. I knew I should have quoted him.........
Last edited:
I remember reading a while back that there are parts to these SC's that if worn out/broken they aren't available when the SC kit is discontinued. What "spare" commonly worn out parts would it be wise to buy if one was buying one of these new SC's.
You lucky dog, Congrats! Are you going to install it yourself? If I'm going to dump several thousand into a SC, it seems prudent to invest some more into spare parts so I don't end up with a $3K heap of scrap metal if something breaks and they are discontinued. I'm sure we'd all appreciate some pics if you can take some.
Last edited:
fjfar80
GOLD Star
Dan -
I tried sending you my billing information for the MAF Sensor (for LandTank's MAF) and the SuperCharger but, my PM was bounced. At your convenience could you PM me or email me so that I can get this order through?
Thanks in advance for your time.
- Mark
I tried sending you my billing information for the MAF Sensor (for LandTank's MAF) and the SuperCharger but, my PM was bounced. At your convenience could you PM me or email me so that I can get this order through?
Thanks in advance for your time.
- Mark
You need to call him and you should never send credit card info over a PM, not secure. He won't complete an order without a call. Better hurry, I feel a vacation is in Dan;s near future
fjfar80
GOLD Star
Romer -
Thanks...actually Dan has taken several of my orders over PM. Due to the time difference (we are GMT +8) it is extremely difficult to call Dan. So, we have resorted to PM ordering. I realize the risks with PM but, I monitor my account very closely and ensure that no fraudulent charges are made. I really have to say that I appreciate Dan's flexibility and understanding. I can't wait to meet him one of these days.
Cheers.
- Mark
Thanks...actually Dan has taken several of my orders over PM. Due to the time difference (we are GMT +8) it is extremely difficult to call Dan. So, we have resorted to PM ordering. I realize the risks with PM but, I monitor my account very closely and ensure that no fraudulent charges are made. I really have to say that I appreciate Dan's flexibility and understanding. I can't wait to meet him one of these days.
Cheers.
- Mark
Sorry Mark, didn't remember you are in Hong Kong
fjfar80
GOLD Star
Romer -
No worries at all...I have to say everyone has been really cool with me ordering stuff from them even though I am in Hong Kong. I have ordered Groucho's rails and clamps, LandTank's MAF, and a few other things. Dan has always been flexible too...a great group of people. I have been waiting a year plus for this super charger...so, if I have to call Dan...trust me I will be up at 2:00am tonight...making that call...I just hope I don't have to. Ha.
Cheers from Hong Kong.
- Mark
No worries at all...I have to say everyone has been really cool with me ordering stuff from them even though I am in Hong Kong. I have ordered Groucho's rails and clamps, LandTank's MAF, and a few other things. Dan has always been flexible too...a great group of people. I have been waiting a year plus for this super charger...so, if I have to call Dan...trust me I will be up at 2:00am tonight...making that call...I just hope I don't have to. Ha.
Cheers from Hong Kong.
- Mark
Mark I have my PM box closed due to the fact that I am in business meetings in SLC UT tomorrow and Friday and as soon as I complete that assignment I will be taking my family on our annual Lake Powell houseboat trip. I will be back in the office on Monday August 11th.
For sure will install it myself! Save for exhaust and trans work all repairs/mods are done by me. Actually bought a '97 FZJ80 last year with engine problems and did a real nice rebuild on it and ended up selling it to a forum member. I do enjoy engine work!
I however, don't think there is much risk of superchargers needing much in the way of service parts.
Any members out there have any comments on this???? How long your rig has been pressure fed and any issues you've had since? Maybe this should be a new thread eh boys?
Last edited:
