Requested pics.
Icon Rebound 17" Wheels
- Thread starter NCMTNS
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Now you all got me worried they order some knock off. Lol! I’m calling tomorrow to confirm this is the the correct part number. 1817855557SB 17 x 8.5 SAT BLACK 5 x 150 5.75" 25mm 110.1mm 2750 LBS
And please correct me if this is the wrong one
Would you mind measuring the actual height of the tire. I want to see how accurate the online info. is. Thanks
Me too! Too good to pass up..
Tommy Dwyer
SILVER Star
If you could check back in here after following up with Discount Tire I would greatly appreciate it
@Tommy Dwyer my local discount tire would only do $200 per wheel, and only if i bought tires... Poly Performance had them at $180 during the holidays maybe they would do a group discount?
I checked with Poly Performance, they wouldn't work much of a deal for us.. $927 for 4
I struggled and still am debating between the black and Ti. I think the black might be the better option 
I think a 17” would be a better “lighter” wheel and i can go down a respectable size without losing a lot of sidewall. Also, I’m not sure a +18 offset is good for my truck since I’m keeping it until it dies and from others on here, a +25 and higher is more acceptable. My current wheel/tire combo weight 101lbs ea
Last edited:
Thanks I was just curious, I plan to run a 17-inch also. I think the weight of the nitto's I'm looking at is about 65 lb a Piece coupled with a 25-pound wheel
I’m still debating between a Nitto RG and Cooper AT3 XLT which is much lighter and also aggressive.
I have never owned any Cooper tires. I already have two sets of Nitto's(ridge and terra grappler) and have been pleased with them. my plan on the LC is to run the stock tires and wheels as my DD but when I need to I'll throw on the nitto's (trail grapplers)
Thank, would you mind turning your steering wheel all the way to the right with your LC on and take a picture of the clearance of your tire to KDSS and lower sway link.
I called and confirmed my price is $170. They might have it in today
@Angelo1 Where?I called and confirmed my price is $170. They might have it in today
My local tire store. Let me get my wheels paid before I release the location in case they screwed up. Don’t want people calling them asking about the price and then they look deeper into it and realize they missed priced it or something.
Would you mind measuring the actual height of the tire. I want to see how accurate the online info. is. Thanks
I don't think you can get an accurate height on an installed tire. I rested a level on top of the tire and measured to the ground and it was 32.75", but measured front to back it looked closer to 34". I don't have a good means of checking the front to rear measurement, nor would I really trust it while installed if I did.
I think the 32.75 is pretty accurate measurement on your part. The trucks weight and the fact the tire pressure is not set to max always lowers the tire size a bit.
