Do 2000 100-series have a disable TRAC button?
Do I need to disable active TRAC if the ARB lockers is in use?
Cheers,
Do I need to disable active TRAC if the ARB lockers is in use?
Cheers,
How to disable Active TRAC?
- Thread starter Snook
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Augie is correct. Plus, you can lock only the rear and still have front traction control which allows for full turning capability. We got the best of both worlds!
- Thread starter
- #4
So it is unnecessary to get a front locker after all, just the rear locker?
Yeah, I have seen other with full lockers being restricted movement in a tight spot.
BTW, who installed the ARB rear locker & air pump for your 100 series?
Yeah, I have seen other with full lockers being restricted movement in a tight spot.
BTW, who installed the ARB rear locker & air pump for your 100 series?
Ohh, there's been times I'm glad I've had my front locker. I wouldn't go back to just ActiveTrac. The combo of rear locker and front ActiveTrac is very effective though in the tight spots where you need to turn.
4Wheeler Supply (in Phoenix) did the lockers. They did a great job. The day a 4.88 rear gear is available for the 100 I'll be back there for the swap-out.
4Wheeler Supply (in Phoenix) did the lockers. They did a great job. The day a 4.88 rear gear is available for the 100 I'll be back there for the swap-out.
- Thread starter
- #6
What gear are we on now?
If you change to 4.88 in the rear, what about the front?
What size is your tire? Right now I have 33" but I am looking at 35" MTR.
If you change to 4.88 in the rear, what about the front?
What size is your tire? Right now I have 33" but I am looking at 35" MTR.
Transmissions:
4-speed = 4.3
5-speed = 4.1
The front 4.88 gears are the same as for the 80.
The rear gear in the 100 is beefed up from the 80 to accomodate the extra power and weight. Nobody has made a new gearset for the rear. We're all waiting though!
I run 35" so a 4.88 is within 1% of my stock 4.3 with that tire size. I NEED GEARS!
4-speed = 4.3
5-speed = 4.1
The front 4.88 gears are the same as for the 80.
The rear gear in the 100 is beefed up from the 80 to accomodate the extra power and weight. Nobody has made a new gearset for the rear. We're all waiting though!
I run 35" so a 4.88 is within 1% of my stock 4.3 with that tire size. I NEED GEARS!
