Ahem DOUCHE ahem ahem.
Doesn't Porltand fly a lot of rainbow flags?
Yep, lots of your people around here. They don't bother me. It's spelled PORTLAND, by the way.
Almost every poster mentioned both seals. It's unfortunate that your reading comprehension is worse than your mechanical knowledge.
Based on your comments it would appear that you've never actually pressed one of these apart and you don't really understand what a sealed bearing is or why they would be damaged when the seals leak.
Lol, ok. I had no question about the bearings, or the fact that they may have incurred damage due to leaking seal(s). I don't doubt that they did. Did you ever see me type anything about bearings or not to replace them while doing this repair? Let me save you some time re reading through this post...I didn't mention that. Your reading comprehension: FAIL. I have actually done this repair, correctly. I replaced my bearings even though they were showing no signs of wear, just because it was the right thing to do. I don't feel the need to qualify myself about my knowledge on bearings, but for the sake of the conversation, let's just say I have more than enough knowledge to speak about bearings. Now, based on YOUR comments, especially your 1-5 list of total bull****, I could easily say that it doesn't look like you have ever done this repair. Your mechanical knowledge: FAIL. It looks more like you read someone's post about how to do it, and made your own paraphrased version. You might consider sticking to what you are good at. Perhaps refueling? For safety's sake I hope it's nothing more than that. Now go fly away Jetboy, fly away!
Last edited: