Help Needed: Trying to Install 2007 LX wheels on 2008 LC (1 Viewer)

[03LX470]

I thought that the 2008 LC has 18" as standard equipment.

Not in the middle east...

 

[03LX470]

I hate to say that I still havent found hubcentric 10mm spacers to use those beautfful LX470 wheels on my 200 series (to clear the larger brakes).

I'ven been searching on the web every now & then but no luck.

 

[KOFIA]

These wheels on mine are from Ultra.

 

[hoser]

You will need to use either a non-hubcentric 10mm spacer or maybe a 1" (25mm) Wheel adapter (can't say for sure since I don't have a 200). If using the 10mm spacers, make sure there are at least 6 full turns on each lug nut otherwise, you'll need longer studs. I would personally go with wheel adapters over spacers.

 

[OrangePips]

So the problem, author describes here means that wheels from 2008 landcruiser have same bolt pattern as 100s but less backspacing, right? I guess I could use 200 wheels on my 100 then.

BTW, can anyone tell the exact stock measurments of 200 wheels pls? width, backspacing, etc..

 

[beaas]

So the problem, author describes here means that wheels from 2008 landcruiser have same bolt pattern as 100s but less backspacing, right? I guess I could use 200 wheels on my 100 then.

BTW, can anyone tell the exact stock measurments of 200 wheels pls? width, backspacing, etc..

You can use 20" Land Cruiser/Lexus wheels on the 100 series, se picture.

I guess the 18" wheels also fit, they have the samme backspacing.

Bjørn Erik

 

[OrangePips]

You can use 20" Land Cruiser/Lexus wheels on the 100 series, se picture.

I guess the 18" wheels also fit, they have the samme backspacing.

Bjørn Erik

Excellent.