that's good for me as long as it's good for the others.
by the way, why did Bart call us a bitch
by the way, why did Bart call us a bitch
Help Installing My Xfr Case (2 Viewers)
- Thread starter 76FJ40
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
by the way, why did Bart call us a bitch
Not us, just you Tom.
Lylia has offered to cook breakfast for us which should get you in and out faster than Fosters if that works for everyone.
OBTW, anyone going to the gub show in Fredricksburg this weekend?
I suppose installing a transfer case counts as ambition...
Devilmans Hand
TLCA #19517
- Joined
- Aug 4, 2008
- Threads
- 140
- Messages
- 3,476
- Location
- Commonwealth of N.VA
- Website
- www.capitallandcruiserclub.org
hmmm...I didn't know there was a show in f'berg. I prob wont be going as i just bought one!
keltec sub 2000 9mm g17 magwell. Sweet...
nice and compact for the cruiser!
keltec sub 2000 9mm g17 magwell. Sweet...
nice and compact for the cruiser!
Devilmans Hand
TLCA #19517
- Joined
- Aug 4, 2008
- Threads
- 140
- Messages
- 3,476
- Location
- Commonwealth of N.VA
- Website
- www.capitallandcruiserclub.org
see you in the morning
Done yet?
- Thread starter
- #28
It's finally back together thanks to Tom, Jon, Sam, Ryan, and a grinder. I went to start it for a test drive and the battery was dead so I'll post an update tomorrow. Thanks again to everyone for your help. This turned out to be a harder job than I expected due to the Toybox moving the xfr back, the extra weight of the orion case, and the interference with the Toybox shift rail.
Special thanks to Sam for the pics.
Special thanks to Sam for the pics.
Last edited:
...despite the exceptional skills and expertise of your capable assistants.....
...aka - The Three Stooges!
Tell Lylia thanks again for the breakfast, it was excellent. It's had to believe that 4 of us fit under your 40 at one time. And just think, we only had to lift it into place 4 times, or was it 3. Can't wait to see the pics, hope they come out.
Devilmans Hand
TLCA #19517
- Joined
- Aug 4, 2008
- Threads
- 140
- Messages
- 3,476
- Location
- Commonwealth of N.VA
- Website
- www.capitallandcruiserclub.org
there were pics?
You were the supposd to be taking the pics...don't tell me we have to take it back out because you forgot to take pics for the build thread!!!!
Devilmans Hand
TLCA #19517
- Joined
- Aug 4, 2008
- Threads
- 140
- Messages
- 3,476
- Location
- Commonwealth of N.VA
- Website
- www.capitallandcruiserclub.org
tell Bob the bad news. Everything has to be taken back out and the metal that was removed has to be put back in.
Devilmans Hand
TLCA #19517
- Joined
- Aug 4, 2008
- Threads
- 140
- Messages
- 3,476
- Location
- Commonwealth of N.VA
- Website
- www.capitallandcruiserclub.org
the second tuesday of this week.
- Thread starter
- #36
Test drive - The good news is that it moves, no noises, nothing gets hot. The bad news is that the Toybox doesn't want to engage. I'm afraid the shift rail may have gotten scrunched when the xfr was snugged up.
Say it ain't so
Bum deal. Let me know when you're tearing it apart again. Should be in town.
Blue77FJ40
SILVER Star
Marlin has a jig for grinding the orion case that he lends out, but many just hand grind. Here's a coupla pics of Rusty's install.
HTH, Dan
HTH, Dan
