Help installing from OEM bumper (1 Viewer)

[landingtheLC]

Hey folks, need help installing from OEM bumper, I bough mines with a bull bar and I am switching back to OEM and need help putting this puzzle together. Pretty much bough everything on the parts diagram but I still feel like I am missing parts( screws, clips etc) can someone please share the instructions off the service manual for the removal or installing of the from bumper for a 1997? Thanks in advance

 

[Kernal]

What model are you working on (FZJ80) and can you post up a photo of what you have done so far?

Is this the parts diagram you have? (should be correct for US FZJ80 models)

 

[landingtheLC]

What model are you working on (FZJ80) and can you post up a photo of what you have done so far?

Is this the parts diagram you have? (should be correct for US FZJ80 models)

View attachment 3721970

Yeah it’s a FZJ80 and yeah that’s the diagram I’m working from and ordering parts. So I don’t have picture of what I’ve so far but I already put the frame extenders pieces and attached P# 52141D and P#52149. The issue I am having is connecting the actual bumper bar to the P#52149. I’m not sure if I’ve the right hardware, I ordered base on parts number but it doesn’t seem to fit properly so maybe I made a mistake. I also can find the right orientation for both p# 52144A. Honestly even a picture of this area would help if anyone has one.

 

[truthdetector]

Put the 52149s on the bumper first. There are special smooth, painted bolts (5211c) that come in from the top of the bumper and a nut underneath.

The nuts for these are

90179-08063​

Don't fully tighten the nuts yet.

Then, when you put the bumper with those parts loosely attached down on to the 52142Cs, you will use nuts 90179-10134, again keeping things loose for now.

Continue with other parts.

 

[landingtheLC]

Put the 52149s on the bumper first. There are special smooth, painted bolts (5211c) that come in from the top of the bumper and a nut underneath.

View attachment 3722188

The nuts for these are

90179-08063​

Don't fully tighten the nuts yet.

Then, when you put the bumper with those parts loosely attached down on to the 52142Cs, you will use nuts 90179-10134, again keeping things loose for now.

Continue with other parts.

Okay thanks a lot this help
Out a lot, I thought I had ordered all the parts needed but I was mistaken.

 

[landingtheLC]

All done thanks for the help everyone!
Now just need to paint this bumper this whole double color is a hit annoying hahah

 

[truthdetector]

Now just need to paint this bumper

No way! That is a beautiful brand-new OEM bumper.