Help identifying parts for newly acquired 80 (1 Viewer)

[FZJ80ARG]

Hi Folks,

Avid reader and new member of the Forum here.
Just got an 80 a few weeks ago and as is my first one I am lost with a couple of parts/connections which I need to identify.

One is the hoses at each side of the block near the firewall, they are both interrupted. I do have heating though. What are they for?

Second is a plug inside the Engine bay just below the DTC. Am I missing a part here?

Last one is what seems to be a mount for the tranny, I think I am missing a plate that connects the mount to the chassis, is that possible?

Appreciate your help. There are very few FZJ's over here.

Cheers


Leo

 

[stu8319]

Hoses are for the rear heater. Yours obviously wouldn't work at this point. Look up the "pesky heater hose". Not sure about the other two.

 

[inkpot]

The rubber block on the side of the transfer case is a vibration dampener. Does not seem to do much so many of us remove the block and mounting bracket.

 

[LFD2037]

The plug is maybe for power antenna. Does yours work?

 

[FZJ80ARG]

Cheers guys...appreciate the help and more so in such a an immediate fashion...

On the rear heater side of things I could not care less, but if it has anything to do with pesky I'd better look it up...

Re the vibration dampener I might give a try to fabricating my own plate, I notice a slight vibration coming from the tranny...

Lastly my power antenna does work...if your rigs do not have anything else on that side of the engine bay then I am not concerned...

Thanks again and beer is on me if you ever come down this side of the woods...

 

[arcteryx]

you may know this, but that main harness loom is not OEM. It appears your truck has been rewired. not sure of your year, but there should be a diagnostics port on the firewall on the little clip in your 2nd pic.

definitely replace the PHH, that could cause major damage. http://ajikoverlandexchange.com/?s=phh @VanGo is a vendor on here and has helped many people with the replacements. I got mine from him.

 

[FZJ80ARG]

Thanks...
The diagnostics port is working as I am getting P0135, PO131, P0325 and P0330...

Cannot avail of US vendors as I am based in Argentina