Hauge's J4 Garage (1 Viewer)

[Hauge]

Nice job on the tank straps.

Thanks, hope they last longer now they are in stainless

 

[allworknoplay]

That is some nice fabrication skill! Good job!

 

[Hauge]

One side ready with fully mounted body bracket and leaf spring bracket

 

[Hauge]

Rear spring bracket, also very rusty. And good I found both front spring brackets

 

[Hauge]

Works continues on the frame

 

[Hauge]

A bit of finish on a repair from the former owner

 

[Hauge]

Last part of work for the frame before sandblasting, metallisering, and EPOXY coat.... fitting a J6 steering house. It is a LX version but the OEM power steer has too many links.

 

[Hauge]

While I used the car as daylight drive, I upgraded the front brake caliber, bolt on J8 12 valve fits perfect

 

[4Cruisers]

Thanks, it is running with a 3B diesel and 5 speed gearbox. I'll be upgrading with a turbo charger and Intercooler.

Does it have the drum parking brake on the split transfer case? I bought a split transfer case from an '85 BJ45 for my '71 FJ40, but haven't mated it with my H41 from an '85 HJ47 yet. Except for 5th gear, it should have the same gearing as yours.

 

[Hauge]

While the frame was out of the workshop, I used the space and time to renovate Bothe axels

 

[Hauge]

and of course Junior's Gator needed a services too

 

[Hauge]

Preparing axels for sandblasting and paint. Also fitting air lockers reinforced drive shafts

 

[Hauge]

Pick up of frame parts at the painter

 

[Hauge]

Does it have the drum parking brake on the split transfer case? I bought a split transfer case from an '85 BJ45 for my '71 FJ40, but haven't mated it with my H41 from an '85 HJ47 yet. Except for 5th gear, it should have the same gearing as yours.

No my hand braks are in the rear drums on the axel. I would expect the same as you mention

 

[1911]

Very nice work!

Where in Denmark are you? My great-grandfather emigrated to the U.S. from Hjørring.

 

[Hauge]

Very nice work!

Where in Denmark are you? My great-grandfather emigrated to the U.S. from Hjørring.

Thanks

I'm base 250 km south of Hjørring, near Billund.

 

[Hauge]

From the doner car I had a lot of ekstra spare parts, they where made ready for long time storage. I had a rusty problem on my anchor plates, but I found a UK web page where I could order new ones. The new anchor plats was also sandblasted and metallized. To keep the paint layer at a minimum I spray paint the plates on my own.

 

[Hauge]

Axels came back to the shop and assembly began and I received my new white rims 15x10"

 

[Hauge]

Since having kids and renovating a TLC wasn't enough, I started renovating half of my work shop (I was needed )

 

[Hauge]

A picture from the last race before overhaul