Does anyone have these variation of fusible links on a very early 70 Series ?
Thanks for Amy help
Matt
Thanks for Amy help
Matt
ARCHIVE Has anyone seen or has this particular Fusible Links & Also : 90982-08233 / 90982-01049 are alive once again
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
This what mine looks like
1986 BJ70 (Canadian spec)
1986 BJ70 (Canadian spec)
- Thread starter
- #4
THANKS !
i will be Crafting Up , this particular Varity / PART # here this week for sure ....
and
there is a SINGLE in-like 2 connector housing Varity to ?
do u have one on your other battery ?
- Thread starter
- #6
Your picture does not display correctly to me in mud. [an icon that I am unfamiliar with titled wire-2-jpg.3233366]it might look like this mr. Downey
The following are the pictures of what appears to be the fusible link connected to my first battery (i.e., 12v potential) via a pigtail adapter.
[obviously I disconnected what I think is the fusible link at the harness connector]
The connections are all single blades.
A couple of shots just what I identified as the pigtail adapter. Note that it appears that the pigtail was repaired at some point since there is a color change under the heat shrink.
If you would like additional pictures at different angles and/or other information, let me know what you need.
Thanks
- Thread starter
- #9
i just made these last night .....
do you have 2 batteries ?
with a double fusible links on the other battery by chance ?
Part # 90982-08249 Is what you have above and what I reproduced below …
- Thread starter
- #10
- Thread starter
- #11
Can you show me please the back side of this 2 wire green connector ?
I have these all ready to go but am unsure ?
which terminal bay the yellow and green links wires go into ?
- Thread starter
- #12
90980-08233
At your service …
.
At your service …
.
Fantastic
How do I order them?
Thank you
How do I order them?
Thank you
- Thread starter
- #14
TreadingLight
"Overlanding is Sh*t"
My fusible links were missing when I picked up my '90 Aussie hzj75. When I looked up the part number it led me to the same link @LDowney posted.
My problem though is I am missing the vehicle harness side. I would love to restore that back to stock so I could use OEM type replacement links.
Do you have connectors / terminals that would mate to your OEM style fusible links?
- Thread starter
- #16
if you require HARNESS side OEM Connector Plugs to join up with your OEM fusible links i reproduce , then YES i have them availble also ,
they can come with or without pigtails pre-installed ,
all i would need to know is the COLOR of the harness side wires i would be matching up to .........................it's EAZY PEEZY from there
you should have a 2nd fusible links set up on your 2nd battery ?
if you do can you post photos of it as well , Please
thanks
matt
TreadingLight
"Overlanding is Sh*t"
Will do! It may not be as simple as we'd like as the factory harness is pretty hacked up but I will get you pics. This has long been on my project list.
My second battery is an auxiliary battery isolated with a big solenoid. It powers a set of circuits through a custom bussman RTMR relay box with fuses and a circuit breaker. Not sure if I'd put any fusible links there but we can definitely look into it.
My second battery is an auxiliary battery isolated with a big solenoid. It powers a set of circuits through a custom bussman RTMR relay box with fuses and a circuit breaker. Not sure if I'd put any fusible links there but we can definitely look into it.
