Group parts buy from Australia- Cheap! (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

40Flipper

Master of Nothing
SILVER Star
Joined
Dec 26, 2006
Threads
323
Messages
5,276
Location
Mt. Millis
Website
www.rinnadvisors.com
THIS BUY IS CLOSED!!!!!

_________________________________________________________________________________________


80 SERIES BARN DOORS ARE AVAILABLE!!!!!!

Prices- (In USD and INCLUDES delivery to Boston, MA)

60 series barn doors- $600 includes latches and hardware

H55F- 5 speed- professionally rebuilt $2500 (includes rebuilt transfer case)

H55F- 5 speed- $1050 used (includes transfer case) They have 8 of these, first come first served. (4 spoken for so far)

H41- 4 speed- $800 (split or non-split style)

UPDATED: 1HJZ diesel half cut, 5 speed H151 transmission, air, PS etc this is out of a 1993 HJZ troop carrier. was purchased in the outback and lived it's whole life there. My guy down there says it runs excellent and has about 250000kms (off the top of his head) cost $6500 with delivery to Boston

2H diesel engine- used, runs fine $1800. might get this down a hundred or two

60 Slider windows $60 (each side)

P/S box with drag link- $250

AC setup without compressor $500

Full Floater 40 series axles $450 (doesn't include 3rd member)

Cable lockered rear axles $1000 (rare down there apparently)

UPDATE:

Good news and bad news:

1. 60 series seats are only available in BROWN. the other ones they had went away. They only have one set right now and I'm having them look for another as I have payments for 2 already.

2. I got 2 sets of 60 series slider windows- those were the only decent ones they had right now. UPDATE: now they have more... 4sets available


Please send a check to
John Corcoran
209 Curve Street
Millis, MA 02054

PayPal (add the 3% fee please) to:

duxburyclassics at yahoo dot com

Items are limited and first come first served

PM me with other requests. Make sure they are sizable items. Not chasing down rubber gaskets or bolts.

NOTE: If you have already PM'ed me with specific requests and it is not listed above, it means that they do not have any of the items you requested at the yard in AU.

I've had some good initial interest from people. Whether we do the container all depends on if these people (and a few more) commit to buy. I need at least 8-10 big items to come with the shipment to make it all worth doing.

Cutoff date for orders is November 7th. please email interest to john at charitywines.com and put "Australia" as the subject line so I can keep it organized.

Pass the word around through MUD

Payment must be up front and in full. Will arrive in February or so. No warranty, guarantees, etc. This is more of a communal buy. Not doing this as a business or a money-making venture. Just offsetting my shipping costs.

Pass the word!


John

I"VE CHECKED ON THE FOLLOWING ITEMS AND THEY ARE UNAVAILABLE:
1HDT
3B
12HT
13BT
long range gas tanks
45 beds
60 series amby doors
soft top bows
heater boxes
 
Last edited:
Awsome John. What a service to the LC community. Thank you!!!

Compliments will not get you any discounts.

I'm hoping I can get 8-10 people to grab 5-speeds for the container and it will be worth it. That's a great price for a 5 speed alone. Cruiserparts has a 5 speed with a bad 2nd gear (without the transfer case) for $1000.

I'm buying a rebuilt H55 for myself.
 
so no cable lockered 3rds?
and why not back the truck up to your retaining wall in your driveway its about the same height as a loading dock. just roll the stuff right out onto the lawn.......
 
so no cable lockered 3rds?
and why not back the truck up to your retaining wall in your driveway its about the same height as a loading dock. just roll the stuff right out onto the lawn.......

will check on the 3rds. forgot.

How do I get them off my lawn once they are on there?? Seriously though, an 18 wheeler truck won't fit down my street
 
call AAA tell them you need it towed to your garage.:)they should be able to back a flat bed trailer right up to the retaining wall get the truck on there and then tilt the ramp and let it down. :D
 
Trust me, it won't work. We can find a loading dock through someone here.
 
Any idea when the container would arrive? 3 months from when it sets sail?
 
P/S box with drag link- $250

RHD or LHD? I am asuming 40 series?

What port is the box leaving from?
 
Trust me, it won't work. We can find a loading dock through someone here.

How long would the dock be tied up? Not volunteering yet.
 
Hopefully just a few hours
 
Maybe someone near you will take on the responsibilty to ship these things for others?

If so, I will take a used 5 speed...
 
Maybe someone near you will take on the responsibilty to ship these things for others?

If so, I will take a used 5 speed...

I guess I could get organized enough by the time they leave. It'll offset my costs more to have more people buy so guess I'll take a day or two off of work.

Have at it!
 
Can you put me down for 60 slider windows, 60 split rear bench ( brown ) and possibly a used H55 / split case combo? When do you need money by?
 
Money would need to be in by November 7th. When can you let me know if you'd like the 5 speed? Just want to keep a solid "dibs" list going. Happy to do the other 2 items either way.
 
sorry John,

I'm out..... as good of a deal as it is, it's to much for me right now:frown:
 
Money would need to be in by November 7th. When can you let me know if you'd like the 5 speed? Just want to keep a solid "dibs" list going. Happy to do the other 2 items either way.

I can definitely pay for the sliding windows and the split bench, the 5 speed is my stretch. If you need the money by the 7th, just count me in for the sliding windows and the split bench.
 

Similar threads

Users who are viewing this thread

Back
Top Bottom