http://greenville.craigslist.org/cto/4527579716.html
Would be good for parts
Would be good for parts
For Sale / Wanted To Buy (3 Viewers)
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
NCFJ
Supporting Vendor
Hey Gabe, a year ago you would not have been looking at mini truck adds 
I know
but i have always wanted one. Got slot to do still before August 18th.
but i have always wanted one. Got slot to do still before August 18th.
1985 FJ60 in nearby Pull-It lot, just posted:
http://charlotte.craigslist.org/pts/4533793400.html
http://charlotte.craigslist.org/pts/4533793400.html
BGarcia88FJ62
SILVER Star
Stuff I'm offloading.
All prices are negotiable, All offers will be considered, Local pick up would be preferred and more than willing to meet anywhere around Georgia, Alabama, Tennessee, North/South Carolina. I'll be more than happy to ship any item at the purchasers expense. I Guess I'm limited to 5 Pics Let me know if y'all have any questions or would like to see pics of anything specific I got a bunch.
I have a 2F PO spun a bearing, I don't believe it overheated, I haven't been into it at all, The head is in great shape, valve train is very clean. Block looks good. $350.00
I have another 1980 2F that was been completely disassembled for a rebuild, Everything has been bagged and tagged, Bearing caps, Pistons and rods have been stamped for reassembly. This was a running motor prior to being pulled approximately 160-170 K all the parts look to be in good condition in need of cleaning and a rebuild. $450.00
Bell Housing and Fly Wheel $45.00
1980 H42 4 Speed $175.00
1980 Split Transfer Case (Disassembled for Rebuild) $225.00
2F Carb Insulator Plate $35.00
1980 Carb (Needs Rebuild) $125.00
Intake Manifold $150.00
(2) FJ60 Long 30 Spline Axle Shafts $40.00 Ea.
(1) FJ60 Short 30 Spline Axle Shafts $25.00 Ea.
Left and Right Front Seats $50.00 Ea.
Rear Seat Upper $175.00
Rear Seat Lower $100.00
Dual Battery Mount (Optima or similar size AGM) $50.00
All prices are negotiable, All offers will be considered, Local pick up would be preferred and more than willing to meet anywhere around Georgia, Alabama, Tennessee, North/South Carolina. I'll be more than happy to ship any item at the purchasers expense. I Guess I'm limited to 5 Pics Let me know if y'all have any questions or would like to see pics of anything specific I got a bunch.
I have a 2F PO spun a bearing, I don't believe it overheated, I haven't been into it at all, The head is in great shape, valve train is very clean. Block looks good. $350.00
I have another 1980 2F that was been completely disassembled for a rebuild, Everything has been bagged and tagged, Bearing caps, Pistons and rods have been stamped for reassembly. This was a running motor prior to being pulled approximately 160-170 K all the parts look to be in good condition in need of cleaning and a rebuild. $450.00
Bell Housing and Fly Wheel $45.00
1980 H42 4 Speed $175.00
1980 Split Transfer Case (Disassembled for Rebuild) $225.00
2F Carb Insulator Plate $35.00
1980 Carb (Needs Rebuild) $125.00
Intake Manifold $150.00
(2) FJ60 Long 30 Spline Axle Shafts $40.00 Ea.
(1) FJ60 Short 30 Spline Axle Shafts $25.00 Ea.
Left and Right Front Seats $50.00 Ea.
Rear Seat Upper $175.00
Rear Seat Lower $100.00
Dual Battery Mount (Optima or similar size AGM) $50.00
Hello. I was looking to replace the front driver side fender flare, running board, and the whole front bumper on my 97 Lexus LX 450.
The parts that I have found are hard to come by and are rather expensive. I thought about letting a body shop do it for me, but the lowest quote I've gotten is $3,500 and thats because he can't find a bumper.
If any one has ANY suggestions I would appreciate it!
If any one has used parts they want sell that match my list or know of anyone who does, I would appreciate it as well!
The parts that I have found are hard to come by and are rather expensive. I thought about letting a body shop do it for me, but the lowest quote I've gotten is $3,500 and thats because he can't find a bumper.
If any one has ANY suggestions I would appreciate it!
If any one has used parts they want sell that match my list or know of anyone who does, I would appreciate it as well!
Thank you
For that much you could go with an ARB or other aftermarket bumper. Running board should be easy, most people take them off. Someone will chime in.
http://athensga.craigslist.org/cto/4538814250.html
via cPro Craigslist App
Android: http://bit.ly/CL_android
iOS: http://bit.ly/CL_iOS
Just buy this and have 2
via cPro Craigslist App
Android: http://bit.ly/CL_android
iOS: http://bit.ly/CL_iOS
Just buy this and have 2
Holy smokes! That can't be correct!
Got to be a scam!
Scam, flag it before someone gets taken. They usually have a weird asking price.
Wow thats high. TO each his own, but if you are patient you can find parts on here for less than half the prices you posted.
Not mine just passing it on.
12 ton Warren Wench - $400
http://greenville.craigslist.org/pts/4540308445.html
via cPro Craigslist App
Android: http://bit.ly/CL_android
iOS: http://bit.ly/CL_iOS
12 ton Warren Wench - $400
http://greenville.craigslist.org/pts/4540308445.html
via cPro Craigslist App
Android: http://bit.ly/CL_android
iOS: http://bit.ly/CL_iOS
Warren wench…
Warren
Wench
Not a bad price!
Warren
Wench
Not a bad price!
Lol. Like i said it's not mine.
LOL!
Amazing what you find when you spell it wrong
10000 lb wench - $175
http://asheville.craigslist.org/cto/4544953432.html
via cPro Craigslist App
Android: http://bit.ly/CL_android
iOS: http://bit.ly/CL_iOS
10000 lb wench - $175
http://asheville.craigslist.org/cto/4544953432.html
via cPro Craigslist App
Android: http://bit.ly/CL_android
iOS: http://bit.ly/CL_iOS
NCFJ
Supporting Vendor
I search for Land Cruisers all the time. Two separate listings and adds
Landcruiser
Land Cruiser
Landcruiser
Land Cruiser
