I am thinking on these. Although I just saw that Longfield has the 30 splines on sale now!
May just have to drop the change. I will let you know.
For Sale / Wanted To Buy (2 Viewers)
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I am thinking on these. Although I just saw that Longfield has the 30 splines on sale now!
May just have to drop the change. I will let you know.
Get the 30 spline Longs - they are a thing of beauty...
Make me an offer on the other stuff
Make me an offer on the other stuff
I am thinking on these. Although I just saw that Longfield has the 30 splines on sale now!
Price drop on FJ40
hello...dropped the price on my 72FJ40 to $4300...thanks...for info/pics look at post #68 #69...thanks..
hello...dropped the price on my 72FJ40 to $4300...thanks...for info/pics look at post #68 #69...thanks..
For Sale
5 Bridgstone Duelers H/T 265 70 R17 off my FJC. 4 pulled at 10,000 miles + a spare. Great shape. No plug. Road use only. All 5 for $350 obo. Local pick up preferred.
Other stuff:
4 speed tranny out of a 78. Ran fine when pulled. $100
Besttop rear seat black good shape. Seat only no brackets. $25
1 Maxxis Mudder for spare on 8 lug rim LT 305/85 R16 $20
Free
1 3 speed tranny/boat anker. Pulled straight through the clutch bearing seezed broke shifter plate. Come get it. Could also chain small dogs to it.
1 78 gas tank promissed to Marshall. If he declines its up for grabs.
I'll see what else I got.
Pick up only please. Delivery depends on where and WHO you are.
`
5 Bridgstone Duelers H/T 265 70 R17 off my FJC. 4 pulled at 10,000 miles + a spare. Great shape. No plug. Road use only. All 5 for $350 obo. Local pick up preferred.
Other stuff:
4 speed tranny out of a 78. Ran fine when pulled. $100
Besttop rear seat black good shape. Seat only no brackets. $25
1 Maxxis Mudder for spare on 8 lug rim LT 305/85 R16 $20
Free
1 3 speed tranny/boat anker. Pulled straight through the clutch bearing seezed broke shifter plate. Come get it. Could also chain small dogs to it.
1 78 gas tank promissed to Marshall. If he declines its up for grabs.
I'll see what else I got.
Pick up only please. Delivery depends on where and WHO you are.
`
I'm still good for the gas tank I just don't know when I can come and get it. What works for you?
Hey Sputnik...I need the passenger side windshield wiper...mine has stripped out...thanks....also any word on the dash pad? Thanks
Dash sold and shipped. Ended up with a long list on that item - wish I new they were valuable.
Wiper is yours for free - IF you can get Jim to remind me to give it to him .
Wiper is yours for free - IF you can get Jim to remind me to give it to him
.
Eskimo
SILVER Star
FJ40 rear axle for sale. Set up for spring-over, 4.10 gearing, has disc brakes, stainless braided brake lines, and comes with spare axle shafts. $500
SM465 tranny mated to FJ40 t-case with aluminum adapter plate. Tranny has recent rebuild. Tranny has input collar to be mounted behind FJ40 straight 6 engine. Transfer case is twin sticked, has t-case saver installed, and has AA cross member. The 3-speed bellhousing is included to allow this unit to be mounted to a Cruiser engine. Will also include the .120" wall tube rear driveshaft from the set-up (is long enough for spring over with flipped rear springs). $700
FJ40 front axle. Axle is set up for spring over, knuckles have been cut/turned 16 deg, has armored removable front diff cover, 4.10 gearing with LockRight locker, 4340 cromo inner shafts and birfields, All-Pro spindle stud kit, minitruck knuckles, high steer, FJ60 calipers and rotors, Aisin hubs, U-bolts and plates included. Axle has been recently rebuilt. $1000
The rear axle and tranny/t-case are located in Roxboro, NC and the front axle is in Holly Springs, NC (near Raleigh). No shipping, but we could work out meeting up somewhere.. I'll be in Charleston the 19th & 20th. Buy both axles and you'll have a bolt-on spring over.
Also, Set of (5) 38.5 x 14.5 x 15 TSL/SX, ~50-60% tread, grooved and siped, mounted on 15"x10", 24 bolt beadlocks with recessed valve stems, 6 x 5.5" bolt pattern.
Matching spare on a matching beadlock, 100%, never used (still has the nipples).
$950 takes 'em all
SM465 tranny mated to FJ40 t-case with aluminum adapter plate. Tranny has recent rebuild. Tranny has input collar to be mounted behind FJ40 straight 6 engine. Transfer case is twin sticked, has t-case saver installed, and has AA cross member. The 3-speed bellhousing is included to allow this unit to be mounted to a Cruiser engine. Will also include the .120" wall tube rear driveshaft from the set-up (is long enough for spring over with flipped rear springs). $700
FJ40 front axle. Axle is set up for spring over, knuckles have been cut/turned 16 deg, has armored removable front diff cover, 4.10 gearing with LockRight locker, 4340 cromo inner shafts and birfields, All-Pro spindle stud kit, minitruck knuckles, high steer, FJ60 calipers and rotors, Aisin hubs, U-bolts and plates included. Axle has been recently rebuilt. $1000
The rear axle and tranny/t-case are located in Roxboro, NC and the front axle is in Holly Springs, NC (near Raleigh). No shipping, but we could work out meeting up somewhere.. I'll be in Charleston the 19th & 20th. Buy both axles and you'll have a bolt-on spring over.
Also, Set of (5) 38.5 x 14.5 x 15 TSL/SX, ~50-60% tread, grooved and siped, mounted on 15"x10", 24 bolt beadlocks with recessed valve stems, 6 x 5.5" bolt pattern.
Matching spare on a matching beadlock, 100%, never used (still has the nipples).
$950 takes 'em all
Eskimo
SILVER Star
Oh, and I'm also looking to trade my 8274-50 for a low-pro Warn 9500, 9.5, whatever.. Ideal would be a 9500xp.
Prefer an external solenoid pack, but not required.
My 8274 looks damn near new, as the rig is stored indoors. Cable is in good shape as well, since I'm really anal about how it's wound on the drum. (Just ask anyone who has wheeled with me)
I have to swap it because of some new tubework that's going on the front. Don't WANT to, but I really have to.
Or, will sell outright for $850obo
Prefer an external solenoid pack, but not required.
My 8274 looks damn near new, as the rig is stored indoors. Cable is in good shape as well, since I'm really anal about how it's wound on the drum. (Just ask anyone who has wheeled with me)
I have to swap it because of some new tubework that's going on the front. Don't WANT to, but I really have to.
Or, will sell outright for $850obo
Hey Bill I know tellico is this weekend and I'm just now asking tonight sunday...but the gears for the driver's side window crank is all stripped out and I need to get it replaced....if you don't have time this week that's ok...but I would like to buy the window crank and assembly and guts to replace mine. Thanks Bill.
Chuck
Chuck
If this is easy to pull - I'll try and get to it before Jim leaves...
Can you just post exactly what'd I'd be pulling with a description on how to do it - I don't wrench much on window krap - not something 40 drivers worry about (well except Jim - cause he rolled on a trail that even my kid thought was flat
).
Shouldn't be a problem if it's quick and easy to do.
Can you just post exactly what'd I'd be pulling with a description on how to do it - I don't wrench much on window krap - not something 40 drivers worry about (well except Jim - cause he rolled on a trail that even my kid thought was flat
).Shouldn't be a problem if it's quick and easy to do.
Actually Bill I've never torn one apart either except on the 40....but I'll take everything inside cause I'm not sure what part of mine is exactly worn out. I believe the doos panels pop off at the bottom and when you take the screws out of the door handle and door opener I think you can slide it up then. Thanks
1995 Mustang Cobra for sale in NC
Hi all,
A guy in my Mustang club is selling his cobra. I thought I would post it up for everyone. It's located in Mebane, NC and has less than 40k on the odometer. Please see the auction for details on the car. If you want to contact him directly, let me know and I will get you all his info. He has about $26K invested and I think he is looking to get 19K out of it. Thanks.
Click here for the auction itself.
Hi all,
A guy in my Mustang club is selling his cobra. I thought I would post it up for everyone. It's located in Mebane, NC and has less than 40k on the odometer. Please see the auction for details on the car. If you want to contact him directly, let me know and I will get you all his info. He has about $26K invested and I think he is looking to get 19K out of it. Thanks.
Click here for the auction itself.
Gas tanks
I also have two '71 OEM Steel under seat fuel tanks, $60 ea little rust.
I also have two '71 OEM Steel under seat fuel tanks, $60 ea little rust.
While everyone was in Tellico having fun and I was picking up a parts 60.
If anyone needs anything let me know. I am trying to figure out what parts I am going to keep.
Its a '83 FJ60 Brown with Brown interior
Already Gone:
Front grill and headlights
front fenders
Tranny
TC
I will try to get some pictures up soon.
If anyone needs anything let me know. I am trying to figure out what parts I am going to keep.
Its a '83 FJ60 Brown with Brown interior
Already Gone:
Front grill and headlights
front fenders
Tranny
TC
I will try to get some pictures up soon.
