For Sale Section

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Last edited:
in Pagosa Springs, willing to drive to Durango

3 4Runner wheel, only 2 center caps and Dick Cepek Fun County 265/70/17 10ply
one tire is at 9/32 & next at 8/32 & next at 4/32

these have been on my off road trailer
$200 OBO

IMG_0136.jpeg


IMG_0137.jpeg


IMG_0138.jpeg


IMG_0139.jpeg
 
Last edited:
Tires on Craigslist.

new price here to Derailed people $175
 
coops2k said:
Tires on Craigslist.

new price here to Derailed people $175
Click to expand...
New price $150

or does anyone have a single wheel like these, then I will use for snow tires
 
Time to thin the hoard of parts and figured I post here first offering some killer deals. Most of these parts have been collecting dust for years and I've got no intention of using them so come get them. Attaching pics of some stuff to get an idea of what I got, I've got more parts but this is what's on top of my head right now. DM and lmk what you want and I'll get a price for you.

88 Pickup Xtra Cab 300k 3.0 5spd (no plow)
91 Fj80 parts vehicle w/title
04 4runner v8 parts vehicle
99 100 series misc parts
Fj80 rear links, New bushings
4 link bracket kit
3vzfe motor, runs, 130k
r150 transmission (vz)
Pass & Driver drop tcase for r150
Rear 1st gen 4runner tailgate
Misc late 70s, early 80s pickup parts
Fj60 driver seat (gray)
1st gen tacoma/ 3rd gen 4runner Front solid axle leaf spring kit
17" steel FJC wheels
200 series full length FrontRunner roofrack

Third members:
A bunch of 8" 4.10 open in rear minitruck housings
8.4" 4.88 open
9.5" 4.10 open
Hi pinion 8" open (needs gears)

Springs:
OME 861
Slee Offroad 80 series rear 6" heavy load
Factory coil rear 4g 4runner, 3g 4runner, 100 series(with airbag helper springs)
Fj60 full set of springs w/ New bushings
Minitruck rear leaf springs
Screenshot_20220324-155853_Gallery.jpg
Screenshot_20220324-153951_Instagram.jpg
Screenshot_20220324-155917_Gallery.jpg
Screenshot_20220324-160015_Gallery.jpg
Screenshot_20220324-160106_Gallery.jpg
 
Corbet said:
PM sent. I was hoping that 200 series rack had the same tray as a 80 series and would work with a mounting foot swap. It might but the 80 tray is a different size. :(
Click to expand...
Yeah, but the rails fit perfectly on the 100 series roof, just need to drill 4 holes on each side and put nutserts in. But I shortened my roof so it doesn't exactly work w/o some modifications
 
SOLD

I have a TuffStuff Alpha ll RTT for sale. its in very good shape. I am selling it because I find it hard to close.
$1500.00.

IMG_0282.jpeg


IMG_0284.jpeg


IMG_0283.jpeg




IMG_0285.jpeg
 
Last edited:
I have a Victory 4x4 half rack for sale and a plastic cover I made for it. I am selling the Victory 4x4 half rack and the cover goes with it or you can pass on the cover.

$800 OBO.

I had a RTT on the rack, but decided to move the RTT to the trailer and I am going to an ARE shell. The Victory4x4 half rack mounts to the Tacoma rails, made from aluminum and is powder coated. There are 8 small holes drill in the top rack that where used to mount the RTT, otherwise the the Victory 4x4 half rack was mounted and then covered before I did the Pony Express trail https://www.*****************/forums/threads/pony-express-across-utah-nevada.40864/
I made the cover to protect stuff and keep most of the rain and dust out, it has 2 large computer fans and temperature switch to keep air flowing in the heat. The rear opening locks in place with the tailgate closed.

IMG_1947.jpeg


IMG_1948.jpeg


IMG_1943.jpeg


IMG_1946.jpeg


IMG_1945.jpeg


IMG_1944.jpeg
 
Here are pictures before the plastic cover

IMG_0281.jpeg


IMG_0280.jpeg


IMG_0646.jpeg
 
Corbet said:
I have a set of FJ40 axles from a 1976 (disc) that should be available mid summer as we tear down the truck.
Click to expand...
I hope to be rolling around by then! But if not, I am very interested.
 
Hey guys,

Up For Sale: 100 Series OME Torsion Bars - NIB

I found out that my 100 already had Sway-A-Way torsion bars and didn't see the point in spending
on labor to change them out.

sleeoffroad.com

OME Torsion Bar Set - '98-07 Land Cruiser - Gas - Slee Off Road

30.4mm x 45.66" Long Manufactured from premium grade spring steel with a resilient powder coat to protect against corrosion Precision drawn, dropped forged ends for optimal strength and integrity Pressure rolled splines for precise fitment and increased spline durability Hardened and tempered...
sleeoffroad.com sleeoffroad.com

Asking $250 - Obviously would rather not ship so would like to sell locally or semi-locally.

I'll throw these Lower Control Arm reinforcement brackets in for the buyer

OME Lower Control Arm Reinforcing Brackets Kit - Slee Off Road - https://sleeoffroad.com/products/fk27/

Hit me up.
 
SOLD

I am selling my Dometic CFX75DZ for $1000 OBO. This is just too big of a fridge for me. I got it for my longer trips to Alaska and other places, but I am setting my trailer up to use my older ARB as a freezer, so I just dont need this, going smaller.
Included will be the Dometic cover and a DFG Slide
Dometic CFX 75DZ. Dometic CFX3 75DZ - https://www.dometic.com/en-us/outdoor/coolers/electric-coolers/dometic-cfx3-75dz-225774?v=9600024621
CFX 75DZ protective cover. Dometic CFX3 Protective Cover 75DZ - https://www.dometic.com/en-us/outdoor/coolers/accessories/cfx3-pc75-231086?v=9600026465
DFG slide. Fridge Slide for DOMETIC CFX3 75DZ - DFG Offroad - https://www.dfgoffroad.com/for-dometic/35-fridge-slide-for-dometic-cfx3-75dz-dfg-offroad.html?srsltid=AfmBOooCmh_TQ8kuyv1-2Y2OxJMiwHsI7ZKtW4OtpznfVbkvr24NnhfR

IMG_0712.jpeg


IMG_0713.jpeg


IMG_0714.jpeg


IMG_0715.jpeg


IMG_0716.jpeg


IMG_0717.jpeg
 
Last edited:
OK guys, I did my trip this year with my Texas buddies and realized I dont need a fridge / freezer this big, so I am lowering my price to
$800. OBO someone needs this fr the 4th of July

that is for the fridge and includes the cover and slide
 
Last edited:
You must log in or register to reply here.

Similar threads

krazykat69
FOR SALE: 2010 Lexus GX460
Replies
0
Views
506
krazykat69
krazykat69
wimberosa
Machine shop for manifold surfacing?
Replies
2
Views
649
wimberosa
wimberosa

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom