For Sale @ High Desert Cruisers (8 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

What condition? There is one on the side of my house. It will need some work. Some PO thought it would be cool to cut it and have just the cab covered. He put it back together with some mesh tape and crapppy adhesive.

hey, if that doesn't work for George, I could use it. I would need to cut it down just like that for my trailer.
 
hey, if that doesn't work for George, I could use it. I would need to cut it down just like that for my trailer.

I'll tell George, but I imagine he isn't interested in something like that. I'll let you know this weekend.

It is just the fiberglass top. I am not sure if I put the gutters in the 40 when I finally got the new owner to take it out of my garage. For some reason, he has not even taken the title? I am just tired of it being blown into my neighbors yard. I don't have a problem if dissapears from here. If either of you want it, it here, free to take.
 
Well it pains me to do this, but I have to. My 80 is for sale...
Looking to get 6ish for it.
PM me for details...

Daisy

pouring one for the fallen homies right now... sniff...
 
Well it pains me to do this, but I have to. My 80 is for sale...

Daisy

Well, that's a bummer. We'll hope that circumstances change for you somehow to allow you to keep it.
 
Well thanks for the concern all! The reason for the sale is that me and Christi have another baby on the way! At this point we need to downsize the fleet and get some better fuel economy...
With that being said, here is the skinny on my 80
93, factory locked, 242xxx miles, head gasket done by Onur, birfs done 30k ago, 3.5" OME lift, brand new 285 BFG AT's, Uniden 520 CB, Kenwood stereo, deboarded, deracked, starter rebuilt, remote start, CDL switch, wheels painted gunmetal gray.
The good
Runs great
Starts right up every time
Brakes are recently done, 100 series pads up front
Lockers lock up quickly
Heat/ AC work awesome
Tracks true down the road, no wobble or drift
Have a ton of extra parts that go with it
Comes with factory service manual

The bad
Small PS leak, have the o-ring that is the fix
Reverse lights dont work, corroded connector above the starter, have a used part that should fix it
Small oil leak, either rear main seal or upper pan arch seal. Never drips on the ground, just a little wet
It has the usual pinstriping, nothing too severe
Rear bumper corners have been scratched up pretty good, but they are still attached!
Leather is pretty tore up as usual, the foam is good though
Steering column cover is off, I have a decent one to replace it
Still has a driveline vibe up front around 65mph, cant find it

All in all it has been a fantastic truck. Most of you have seen what it can do wheeling.
I hate to let it go, but life calls!!

6k OBO

DSC01833.webp DSC01835.webp DSC01836.webp
DSC01833.webp
DSC01835.webp
DSC01836.webp
 
Well it pains me to do this, but I have to. My 80 is for sale...

Daisy

Just a thought, a Cruiser can be a home, why not sell the house instead? Best of luck, and congrats with the new one.
 
Daisy - did you not sell the Sequoia yet? Or did you determine that you needed to sell both of your gas hogs to afford the more efficient family hauler?
 
Rudy,
The cruiser could be a home, ive stayed in worse!
Marc,
Did get rid of the Sequoia and got a 4Runner. So were both driving cars that get decent mileage.
 
Did get rid of the Sequoia and got a 4Runner. So were both driving cars that get decent mileage.

Daisy -

Sorry to hear about the potential sale, but congrats on the new addition to the family!

However, once a Cruiserhead, always a Cruiserhead! Or even a 4Runnerhead if you prefer! Maybe you're already planning your mods on "her truck?" Shhh - maybe after the baby's born...
 
Just to clarify: I assisted in the HG for this truck as well as installing a radiator. CDan and I did the front axle job on this rig about 3 years ago.

-onur
 
Thanks for the clarification bud...
Either way, Onur has had his hands on it!

Daisy

Just to clarify: I assisted in the HG for this truck as well as installing a radiator. CDan and I did the front axle job on this rig about 3 years ago.

-onur
 

Users who are viewing this thread

Back
Top Bottom