This truck has been sold
Last edited by a moderator:
for sale: 89 FJ62 with blown engine (1 Viewer)
- Thread starter 3_puppies
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Are You A Dealer?
Von,
Sweet Rigs, Are You A Unimog Dealer?
I Really Wanted A Doka, What Type Of Rear Bed Or Camper Can You Do On These?
Please Excuse My Ignorance, Are These Better Off Being Primarily Work Horses?
Von,
Sweet Rigs, Are You A Unimog Dealer?
I Really Wanted A Doka, What Type Of Rear Bed Or Camper Can You Do On These?
Please Excuse My Ignorance, Are These Better Off Being Primarily Work Horses?
Is the smog stuff still on the 76? What's the condition of the 74? If you have pics could you send them to sethgold@pacbell.net
Thanks
Thanks
Extra info and pics
Here is some more info on the cruiser and some pics following:
Just rolled 150,000 miles, regular maintenance, nothing major has had to be done (very well maintained), NO LOCKERS, 305 X 70 16s Goodyear Wranglers r/s, Grey exterior, Tan interior.
I am trying to get some pictures on here, but am having a hard time getting the resolusion smaller so I can load them. Please be patient.
Also, Yes I am willing to sell the rear bumber (it comes with a 1995 TLC). Just messin, thanks for the interest though.
Here is some more info on the cruiser and some pics following:
Just rolled 150,000 miles, regular maintenance, nothing major has had to be done (very well maintained), NO LOCKERS, 305 X 70 16s Goodyear Wranglers r/s, Grey exterior, Tan interior.
I am trying to get some pictures on here, but am having a hard time getting the resolusion smaller so I can load them. Please be patient.
Also, Yes I am willing to sell the rear bumber (it comes with a 1995 TLC). Just messin, thanks for the interest though.
4runner 4sale
first, if its not allowed b/c its not a LC, sorry...admin, just delete it....hey guys...Its officially for sale....Im a bit bummed..but here it is. Yes, it has a few dings here and there....and some pinstripes....this is easily fixed. Also, the front bumper is a bit messed up, but I didnt really care because I was soon going to replace it...sorry.. Here is what it has...
warn manual hubs
all pro rear lift spacers
marlin sliders, new in Dec, 05
new idler arm
recall on steering components carried out a couple months ago
jasper remanufactured (not rebuilt) 3.0 w/ about 28K
tranny/vehicle has about 128K
custom rear bumper/tirecarrier
surco roofrack w/ 4 lights
ARB safari snorkel, just installed in Jan
31" BFG tires with lots of tread left
extended differential breathers
lights on front bumper
auto tranny
4.56 gears
Lockright rear locker just installed in Jan
oil changed regularly
front brake pads recently changed
comes with spares
(front axles, not assembled, boots, rear spider gears, front hub flanges, swaybar w/ broken end link, front carrier with 4.56 gears [side, spider, ring, pinion], idler arm, couple other misc parts)
7500 or very best offer...wont take too much less
Add 300 for BRAND NEW 33" tires w/ about 500 miles on them
Add 100 for never installed Downey 26 mm T-bars
Located in Sevierville, Tn...oh, and its a 1993
first, if its not allowed b/c its not a LC, sorry...admin, just delete it....hey guys...Its officially for sale....Im a bit bummed..but here it is. Yes, it has a few dings here and there....and some pinstripes....this is easily fixed. Also, the front bumper is a bit messed up, but I didnt really care because I was soon going to replace it...sorry.. Here is what it has...
warn manual hubs
all pro rear lift spacers
marlin sliders, new in Dec, 05
new idler arm
recall on steering components carried out a couple months ago
jasper remanufactured (not rebuilt) 3.0 w/ about 28K
tranny/vehicle has about 128K
custom rear bumper/tirecarrier
surco roofrack w/ 4 lights
ARB safari snorkel, just installed in Jan
31" BFG tires with lots of tread left
extended differential breathers
lights on front bumper
auto tranny
4.56 gears
Lockright rear locker just installed in Jan
oil changed regularly
front brake pads recently changed
comes with spares
(front axles, not assembled, boots, rear spider gears, front hub flanges, swaybar w/ broken end link, front carrier with 4.56 gears [side, spider, ring, pinion], idler arm, couple other misc parts)
7500 or very best offer...wont take too much less
Add 300 for BRAND NEW 33" tires w/ about 500 miles on them
Add 100 for never installed Downey 26 mm T-bars
Located in Sevierville, Tn...oh, and its a 1993
Thanks for the info.
Is this your rig?
http://cgi.ebay.com/ebaymotors/95-L...oryZ6443QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Is this your rig?
http://cgi.ebay.com/ebaymotors/95-L...oryZ6443QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Last edited:
Rust-free (relatively) 60 for sale
Happened to be down at the Toyota dealer in Victoria yesterday. They just got a 1987 60 with 5spd and 2H on trade. Body looked rust free with nice paint (light brown)
Bad points were the 2/3 synchro is going, the air filter was filthy like it hadn't been changed in many years (lots of grit in the bottom of the box), oil leak off the valve cover and probably coolant somewhere too (maybe just at the hose junctions). Truck stinks of dog. Fluid leak off master cylinder causing rust on the housing.
Oil was thin molasses
Still, once they've gone over it, it should look a lot better and the body really was nice. No price when I saw it.
Happened to be down at the Toyota dealer in Victoria yesterday. They just got a 1987 60 with 5spd and 2H on trade. Body looked rust free with nice paint (light brown)
Bad points were the 2/3 synchro is going, the air filter was filthy like it hadn't been changed in many years (lots of grit in the bottom of the box), oil leak off the valve cover and probably coolant somewhere too (maybe just at the hose junctions). Truck stinks of dog. Fluid leak off master cylinder causing rust on the housing.
Oil was thin molasses
Still, once they've gone over it, it should look a lot better and the body really was nice. No price when I saw it.
British Columbia.
still have this for sale
Ebay
Why, yes it is my rig-Thanks! It did not even cross my mind to post that link. I have been trying to figure out how to make my image files smaller so I could post some pics, so thanks again!
Why, yes it is my rig-Thanks! It did not even cross my mind to post that link. I have been trying to figure out how to make my image files smaller so I could post some pics, so thanks again!
The Case mogs he's advertising are based on the 406 chassis- short wheel base, max speed about 46mph. Originally came with a hydraulic hoe on the rear deck. The case models are really set up to work. To make a trail rig, it would be much cheaper to buy a normal 404/406/416.
By the way, Dokas that can be readily imported to the US are 406(swb) or 416(lwb) only, with a few rare exceptions. Expect to pay 20-40k for one in good condition.
By the way, Dokas that can be readily imported to the US are 406(swb) or 416(lwb) only, with a few rare exceptions. Expect to pay 20-40k for one in good condition.
I'll go down a check it out tomorrow. I've dealt with them a lot with my other LC's over the years.
bump
I am very interested in your truck. I live in Ontario (Specifically Kitchener-Waterloo area). From your ad I see that the cruiser is in Vermont. You must have imported it from Canada in the past, would it be difficult to bring back across? please reply or email me at cknische@engmail.uwaterloo.ca. thank you for your time.
Sincerely
Curtis Knischewsky
Sincerely
Curtis Knischewsky
hey,
i'm wondering what shape they're in body-wise.
interested in one or conglomeration of the two for a diesel project.
i'm in central PA 17812
pics or more info to barbourk@etown.edu please
thanks and take care,
i'm wondering what shape they're in body-wise.
interested in one or conglomeration of the two for a diesel project.
i'm in central PA 17812
pics or more info to barbourk@etown.edu please
thanks and take care,
ttt
A
Last edited:
PM'd
