Floor pans,bodymounts floor supports rockers and rear corners.

[Fitzgerald]

Well, from the pics, it doesn't look like the gutter section fits into the gutter and the upper section looks like it would need to be bent to match the curvature of the roof. I'm guessing you're giving us a bit extra metal to work with to match our individual situations?

Just wondering how much it needs to be worked.

And the $$$.

Thanks Bob, so very glad someone is doing this for us!!!

 

[bobm]

Well, from the pics, it doesn't look like the gutter section fits into the gutter and the upper section looks like it would need to be bent to match the curvature of the roof. I'm guessing you're giving us a bit extra metal to work with to match our individual situations?

Just wondering how much it needs to be worked.

And the $$$.

Thanks Bob, so very glad someone is doing this for us!!!

Travis, I am going to increase the angle a couple of degrees to match the roof line. Its not supposed to go inside you need to cut out your old gutter and roof section. They are done in 3 sections per side instead of 1 long piece so you can maintain the curve. I always leave extra metal to work with, they are 2 inches taller than roof line so they can be traced and trimmed. I leave plenty extra on the floor-pans also. When you start installing you will notice the rear pans are almost 3 inches longer than stock. The reason the extra material is left is in case someone makes a mistake they always have the extra material. And if you dont make a mistake you can use it elsewhere.


Thanks Bob.

 

[xtiaan2000]

Would you ever think of making the door sill gaurd things? The ones I have are this soft aluminum and are no good at all!

 

[scrapdaddy]

Hey that's a good idea. I don't think there are any aftermarket ones made anymore. Looks labor intense thou.

 

[bobm]

Would you ever think of making the door sill gaurd things? The ones I have are this soft aluminum and are no good at all!

xtiaan, Ron, probably could. I would need pics or template. I think I threw mine out.

Thanks Bob.

 

[xtiaan2000]

Woohooo! I could send you mine they are a bit gingus, but I am game to donate for the cause. I guess I should get your address when you think you might have some time.

 

[bobm]

xtiaan, send a pic if you can.

Thanks Bob.

 

[YORSIAN]

Hi Bob can send parts to the Czech Republic?

 

[bobm]

YORSIAN, I dont see why not. Shipping may be real expensive. P.M. me on what you need.

Thanks Bob.

 

[YORSIAN]

yet still I'm searching just to not let her I bought it just a week ago, I will definitely report what I need and more expensive transportation reckon with you in usa buying it yet thank you very much

 

[xtiaan2000]

I took a flat piece of stainless to sandwich down the inside edge.

 

[xtiaan2000]

howya like my blue suede shoes?!

 

[scrapdaddy]

I've got some on the shelve and can take a few pictures tomorrow.

Nice shoes!

 

[scrapdaddy]

Bob,

All I have are three loose ones. I have a full set on the 69, if you need them.

The long fat one is the front driver's side

The long skinny one is the front pass. side

The short fat one is the rear driver's side

And the one I'm missing is the skinny pass. side rear

 

[scrapdaddy]

Here are a few more shots.

 

[bobm]

Ron, if you can give me dimensions I will see what I can do.

Thanks Bob.

 

[cruiserjunktion]

Bob - I'll send you mine, if you need templates. Not sure if want to copy them, they are pretty busted

 

[scrapdaddy]

:whoops: Sorry Bob, I forgot to measure them today. I think Mel is right, we should send you some templates. They have alot of curves in them. Not sure if you want to take that on.

I can send what I have also. Betwwen us, we should come up with a good set.

 

[xtiaan2000]

I've got a set as well if you would want them.

 

[bobm]

Thanks Gang, all I would need is 1 good front and one good rear. It doesnt matter which side. The hole purpose of this trim piece is to prevent the gasket from coming off correct?

Thanks Bob.